Hello Community!
So I've finally built my first rig with hours invested, only to get a dissatisfied face when my first attempt at booting failed.
Basically, when I press the power switch, it turns on, fans, LED's, everything, but after about 10 seconds, it shuts off, then turns on again going into a continuous on/off loop with no display on the monitor.
My friend said to try slower ram since it's a Ryzen build, which I did and still no boot. I've also tried a different psu, resetting the CMOS, but it still did the same.
__________________________
Specs:
Ryzen 3 1200
Gtx 1050 oc
4gb ddr4 2133
Asrock Pro4m
CX550m PSU
1tb Blue HDD(used OEM)
__________________________
Thank you for your time!
So I've finally built my first rig with hours invested, only to get a dissatisfied face when my first attempt at booting failed.
Basically, when I press the power switch, it turns on, fans, LED's, everything, but after about 10 seconds, it shuts off, then turns on again going into a continuous on/off loop with no display on the monitor.
My friend said to try slower ram since it's a Ryzen build, which I did and still no boot. I've also tried a different psu, resetting the CMOS, but it still did the same.
__________________________
Specs:
Ryzen 3 1200
Gtx 1050 oc
4gb ddr4 2133
Asrock Pro4m
CX550m PSU
1tb Blue HDD(used OEM)
__________________________
Thank you for your time!