- Aug 17, 2017
- 3
- 0
- 510
So I recently installed a version of linux onto my computer and the install failed and wrote over my windows 10 os so I reseated my memory and no the computer will no longer give a signal to my monitor, keyboard or mouse. The mem ok button is on and I have tried that.
Things I have tried: resetting cmos with jumpers dident work.
Resetting cmos by taking out battery and putting it back in after an hour dident work.
Testing the memory 1 stick at a time dident work.
Moving the ram to other ram slots. Dident work.
Unplugging pc and holding power for a minute dident work.
At this point im stumped seeing as I am fairly experienced in building pc's and I have had this one going strong for about 3 years.
Specs:
motherboard- asus z97-a
Ram: corsair vengence ddr3 2400 mhz
Proccesser: intel i7 4790 4th gen
Graphics card: nvidia msi 960 4gb
Psu: Corsair 850w
Standard corsair obsidion case.
500gb samsung ssd
1 tb wd blue hardrive
Things I have tried: resetting cmos with jumpers dident work.
Resetting cmos by taking out battery and putting it back in after an hour dident work.
Testing the memory 1 stick at a time dident work.
Moving the ram to other ram slots. Dident work.
Unplugging pc and holding power for a minute dident work.
At this point im stumped seeing as I am fairly experienced in building pc's and I have had this one going strong for about 3 years.
Specs:
motherboard- asus z97-a
Ram: corsair vengence ddr3 2400 mhz
Proccesser: intel i7 4790 4th gen
Graphics card: nvidia msi 960 4gb
Psu: Corsair 850w
Standard corsair obsidion case.
500gb samsung ssd
1 tb wd blue hardrive
Facebook
Twitter
Instagram