- Feb 13, 2013
- 62
- 1
- 18,635
Hi,
I have a desktop with a GA-P55M-UD2 Rev 1.0 MB. It was working fine and in the middle of me watching iPlayer just went blank. I saw LED lights from the MB and investigated.
There are 4 LEDs (2 red, 2 green) located at the edge of the MB and labelled "phase LEDs". Now when I switch the PC on from scratch, they are all lit. then they go off, the Gigabyte banner is shown, then W7 starts to load with "Starting windows". Then all 4 LEDs switch on again. Then briefly a blue banner with "no signal". W loads files. Further along the line I get Port-00/01/02../05: No device detected. Then I get the offer of letting W repair the fault. I accept, but "Startup Repair cannot repair the computer automatically". Then I get another banner with various options including "SystemRestore"; that doesn't work, so I try W Mem Diagnostic Tool.. Here everything seems to be OK. I also get: Problem Signature04: 21199701; PS05: Autofailover;PS06:10; PS07:NoRootcause; 6.1.7601.2.1.0.256.1 and also 1033.
After all this, I just keep goibg round in circles. This may be a bit garbled, but everything happens quite quickly.
Manny thanks in advance for lookingt
I have a desktop with a GA-P55M-UD2 Rev 1.0 MB. It was working fine and in the middle of me watching iPlayer just went blank. I saw LED lights from the MB and investigated.
There are 4 LEDs (2 red, 2 green) located at the edge of the MB and labelled "phase LEDs". Now when I switch the PC on from scratch, they are all lit. then they go off, the Gigabyte banner is shown, then W7 starts to load with "Starting windows". Then all 4 LEDs switch on again. Then briefly a blue banner with "no signal". W loads files. Further along the line I get Port-00/01/02../05: No device detected. Then I get the offer of letting W repair the fault. I accept, but "Startup Repair cannot repair the computer automatically". Then I get another banner with various options including "SystemRestore"; that doesn't work, so I try W Mem Diagnostic Tool.. Here everything seems to be OK. I also get: Problem Signature04: 21199701; PS05: Autofailover;PS06:10; PS07:NoRootcause; 6.1.7601.2.1.0.256.1 and also 1033.
After all this, I just keep goibg round in circles. This may be a bit garbled, but everything happens quite quickly.
Manny thanks in advance for lookingt
Facebook
Twitter
Instagram