PC won't boot up if JUSB1 is connected (CPU Cooler)

[jhonevelegados]

Any solutions guys?

 

[Jwpanz]

What are your system specs?

 

[rgd1101]

solution is not to connect jusb1. But seriously, need your full system spec, include make and model of the psu.

 

[jhonevelegados]

What are your system specs?

MOBO: MSI Z170A MPOWER GAMING TITANIUM
CPU: Intel Core i7 6700K 4.00 GHz
GPU: Gigabyte GTX 1070 G1 GAMING-8GD
RAM: Corsair Dominator Platinum Series 16GB (2x8GB) DDR4 DRAM 3200MHz
CPU Cooler: Corsair Hydro Series H100i v2
SSD: Samsung 850 EVO 250GB SATA III
HDD: WD Blue 1TB SATA 6 Gb/s 7200 RPM 64MB Cache
PSU: EVGA SuperNOVA 650 G1, 80+ GOLD 650W, Fully Modular
Monitor: RL2755HM 27" & SE2717HR 27"

 

[jhonevelegados]

solution is not to connect jusb1. But seriously, need your full system spec, include make and model of the psu.

That's what I do just to boot up.

MOBO: MSI Z170A MPOWER GAMING TITANIUM
CPU: Intel Core i7 6700K 4.00 GHz
GPU: Gigabyte GTX 1070 G1 GAMING-8GD
RAM: Corsair Dominator Platinum Series 16GB (2x8GB) DDR4 DRAM 3200MHz
CPU Cooler: Corsair Hydro Series H100i v2
SSD: Samsung 850 EVO 250GB SATA III
HDD: WD Blue 1TB SATA 6 Gb/s 7200 RPM 64MB Cache
PSU: EVGA SuperNOVA 650 G1, 80+ GOLD 650W, Fully Modular
Monitor: RL2755HM 27" & SE2717HR 27"

 

[Jwpanz]

So when you have your H100i plugged in to the USB header it won’t boot? You could try updating your drivers for it. Or just use another USB header if you have one.