So I recently built a pc, everything went well until I turned on the PC and the fans were moving, but nothing appeared on the screen. Basically, there was no signal; so I did what I do usually and removed the CMOS battery and put it back in, didn't work. I also tried removing the ram sticks and putting them back in, but that didn't work. I then tried updating the bios through a USB, didn't work. I checked my CPU to make sure there weren't any bent pins and everything was fine, so after confirming my CPU was fine, I tried switching out the graphics card to see if it was the problem, The graphics card wasn't the problem.
I'm stuck on what to do, can anyone give me suggestions, please?
I'm stuck on what to do, can anyone give me suggestions, please?
Facebook
Twitter
Instagram