I just built my PC, I plugged it into the power outlet and connected my monitor to the motherboard. ( my graphics card didn't come yet ). All the fans work but my monitor says no signal. Is my mobo broken?
1. Why did you get a 6600k and h170. k cpu's go with z170 mobos. A k cpu will go with h170 but u cant overclock it it so it's pointless
2. As I said the best solution is to rebuild the pc again do it slower and more carefully with this https://www.youtube.com/watch?v=0bUghCx9iso video.
3. Check every power and data connector (before you rebuild, not to waste time if it was a fixable mistake)
4.Check the case power switch connector (before you rebuild, not to waste time if it was a fixable mistake)
Check the connection of the 24 pin conector to the mobo check if the power switch is put in corectly. If you have the time reasemble the pc, during assembly a micro mistake can mean that a pc won't boot up
1. Why did you get a 6600k and h170. k cpu's go with z170 mobos. A k cpu will go with h170 but u cant overclock it it so it's pointless
2. As I said the best solution is to rebuild the pc again do it slower and more carefully with this https://www.youtube.com/watch?v=0bUghCx9iso video.
3. Check every power and data connector (before you rebuild, not to waste time if it was a fixable mistake)
4.Check the case power switch connector (before you rebuild, not to waste time if it was a fixable mistake)