Hi all,
Got a "new" supposedly unused H110M Pro-VH plus motherboard, still packaged with DVD and all. Bought a Intel i5 7500 and 2x8GB Corsair Vengeance 2400 C14 rams. Pc turned on a couple of times and installed all the drivers on the dvd for the motherboard and shortly afterwards it just showed a blue screen with a unhappy face and a few stuff written, couldn't see what it wrote as it went blank real fast. Still using Windows 10 32bit OS and wanted to go to 64bit.
Now the only thing happening when I switch it on ia the CPU debug led flashes for a split second and then the dram light stays on for a few seconds and then it switches off, no display whatsoever and the HDD led doesn't even blink. It keeps switching on and off by itself from then on. I tested the RAMs in my new pc and they are working fine. The cpu has been removed, inspected pins and cleaned the cpu with a cotton bud and IPA. Ram slots have no dirt and pins are all still perfect.
Tried 4 different power supplies, all with the same result.
What could I try next to get it working?
Edit: Motherboard stays on without rams installed but still no display
Got a "new" supposedly unused H110M Pro-VH plus motherboard, still packaged with DVD and all. Bought a Intel i5 7500 and 2x8GB Corsair Vengeance 2400 C14 rams. Pc turned on a couple of times and installed all the drivers on the dvd for the motherboard and shortly afterwards it just showed a blue screen with a unhappy face and a few stuff written, couldn't see what it wrote as it went blank real fast. Still using Windows 10 32bit OS and wanted to go to 64bit.
Now the only thing happening when I switch it on ia the CPU debug led flashes for a split second and then the dram light stays on for a few seconds and then it switches off, no display whatsoever and the HDD led doesn't even blink. It keeps switching on and off by itself from then on. I tested the RAMs in my new pc and they are working fine. The cpu has been removed, inspected pins and cleaned the cpu with a cotton bud and IPA. Ram slots have no dirt and pins are all still perfect.
Tried 4 different power supplies, all with the same result.
What could I try next to get it working?
Edit: Motherboard stays on without rams installed but still no display
Last edited: