ECS H55H-CM v1.0 mobo
Intel Xeon X3440
4x2 DDR3 1600mhz ram
Gigabyte RX570 4GB
Despite being 1600mhz my rams were only running at 1333mhz because of the motherboard.
So i went to BIOS and changed ram frequency from auto to 1600mhz then i saved and tried reboot the computer.
Now when i press the power button fans starts to spin and RGBs light up but pc wont post and there is no light on keyboard
I tried reseating rams, reseting bios, took everything apart and put them back again, tried rams on different slots
When i take the rams out and start pc without rams motherboard gives out 3 short beeps that means mobo knows there is no ram installed.
What should i do, is my rams dead or what?
Intel Xeon X3440
4x2 DDR3 1600mhz ram
Gigabyte RX570 4GB
Despite being 1600mhz my rams were only running at 1333mhz because of the motherboard.
So i went to BIOS and changed ram frequency from auto to 1600mhz then i saved and tried reboot the computer.
Now when i press the power button fans starts to spin and RGBs light up but pc wont post and there is no light on keyboard
I tried reseating rams, reseting bios, took everything apart and put them back again, tried rams on different slots
When i take the rams out and start pc without rams motherboard gives out 3 short beeps that means mobo knows there is no ram installed.
What should i do, is my rams dead or what?