[SOLVED] PC won't post, no idea why.

[djolemiksa]

Got new parts, built the computer, powered it on, fans spinning but the screen says no signal.

I've looked all over the internet, nothing helps.

Specs: Prime B350M-A
GTX 1050ti
Ryzen 5 1400
400w PSU
8 gigs ddr4 2400 r

 

[j121]

got any other ram to try with? any beeps?

 

[djolemiksa]

No i don't have any other ram, only 1x8gb,also no beeping.

 

[j121]

i had this problem a few weeks ago . it was bent pins in the cpu socket. check the cpu and the cpu socket if you can see any bent pins. it could be alot of things but Worth a try.

 

[djolemiksa]

Checked it, no bent cpu pins.

 

[racksmith101]

Monitor and pcie power cable plugged into the graphics card?

 

[artisan.9]

Make sure that your monitor is set to the correct input (HDMI, DVI, etc). If it is set to HDMI and you are using DVI it may say no signal. Some monitors will auto select the input, some not. Probably obvious but worth checking.

 

[djolemiksa]

I solved it! Seems it was my PSU. I swapped it for an older one and it posted!

 

[artisan.9]

Good for you, I keep an old power supply just for that but since you said the fans were running I didn't think it was the PS.