- Dec 28, 2020
- 2
- 0
- 10
Hey I recently tried Cyberpunk 2077 with my older system. The game ran smoothly but after maybe 2 hours the game crashed and it went to bsod. The Bsod was stuck at 0% and didn't move for several hours so then I decided to hard boot and now when I turn on the pc, monitor says no signal but the pc is on and the fans are spinning.
I tested with only 1 ram stick in each slot respectively and at random times the pc would turn on but it still froze in windows startup. I tried to go to Bios, succdeeding but it freezes there as well. I suspect its a motherboard issue. Any idea?
Things that I have tried:
-try new ram sticks (no difference, still same problem)
-test gpu with another pc (works)
- test new pc's psu with older pc (didn't make any difference)
-check cables and connections
-change CMOS battery from motherboard
-disassemble all pc parts and and assemble again
System
X79 pro v1.0 motherboard
intel xeon e5-2689
16gb ram ddr3
RX 580 8gb
corsair 500W psu
I tested with only 1 ram stick in each slot respectively and at random times the pc would turn on but it still froze in windows startup. I tried to go to Bios, succdeeding but it freezes there as well. I suspect its a motherboard issue. Any idea?
Things that I have tried:
-try new ram sticks (no difference, still same problem)
-test gpu with another pc (works)
- test new pc's psu with older pc (didn't make any difference)
-check cables and connections
-change CMOS battery from motherboard
-disassemble all pc parts and and assemble again
System
X79 pro v1.0 motherboard
intel xeon e5-2689
16gb ram ddr3
RX 580 8gb
corsair 500W psu
Facebook
Twitter
Instagram