Pc wont turn on

[jacko1000]

So I built my pc but its not turning on ive messed with the power switches but nothing the only Idea I have is that many things seem off, not enough spaces for motherboard inputs, hard drive connector, and other wires from the power supply without anywhere to go. Im really frustrated please help.
Motherboard: gigabyte h110m-a
Rosewill galaxy mod tower 03 case
Psu: seasonic sI2 bronze 520 w 12v
Msi graphics card (no freaking inclination to which one it is anywhere)

 

[feelinfroggy777]

Not everything from your PSU will have something to hook up too. They provide more options than is needed for a basic system so you can add more pieces.

I would start by reviewing where everything from the PSU is hooked up. The motherboard should have a 24 pin connector from the PSU and the CPU should have a connection from the PSU as well. Your graphics card will have a connector as well, but I dont know what model it is, so it could be 6 pin, 8 pin, 6+8pin.

 

[feelinfroggy777]

You should also read your motherboard manual and your case manual. Hooking up the case button connections is the hardest part because it is not a uniform process. There will be Power +-, HDD, LED, etc.

 

[intelliclint]

So I built my pc but its not turning on ive messed with the power switches but nothing the only Idea I have is that many things seem off, not enough spaces for motherboard inputs, hard drive connector, and other wires from the power supply without anywhere to go. Im really frustrated please help.
Motherboard: gigabyte h110m-a
Rosewill galaxy mod tower 03 case
Psu: seasonic sI2 bronze 520 w 12v
Msi graphics card (no freaking inclination to which one it is anywhere)

 

[jacko1000]

So froggy my card has 2 6 pin slots and I hooked them both up my cpu power only has 1 4 pin slot. My motherboard has a manual but no instructions/ labels of what to put where. Ill look online and try the pins again though

 

[intelliclint]

Normally you should start simple CPU, RAM and power. If you can get a POST you may be able to solve your issue from there. One thing to look for is that a CPU fan and the Power for CPU is connected.

 

[jacko1000]

Update so my pins for the switch were wrong and I fixed them but it still wont turn on

 

[jacko1000]

WOO HOO FIXED IT. The pins were actually labeled differently online thanks guys see ya around