PC2100 & 200Mhz FSB

G

Guest

Guest
Can PC2100 memory properly work with a processor that use 200 Mhz front side bus (eg. Duron processor)?
 

wapaaga

Distinguished
Jan 18, 2001
1,070
0
19,280
yeh but then it is just pc 1600

your bbest bet is to push the duron up to a 133 and keep the same speed you will actual see the chip run like it is between 50 and 100 mhz faster then a regular dduron at the same speed
 
G

Guest

Guest
that was a quick answer!

and, is the GlobalWin FOP32-I CPU cooler enough for overclocking a Duron 750Mhz?

thnx
 

wapaaga

Distinguished
Jan 18, 2001
1,070
0
19,280
if you keep it at or close to the same speed then you aren't rerally overclocking

the must perssure gusses on the motherboard chips but it is ok if the board is designed for a 133 fsb
 

wapaaga

Distinguished
Jan 18, 2001
1,070
0
19,280
oh yeh i forgot to tell you that iff you do push the fasb to 133 then your going to have to unlock the chip to lower the multplers so that your chip speed does not go much higher along with the heat


to let youy know the limit for most durons is around 1ghz but you need good cooling to reach that

which mean a big noise fan or a water cooled system