Question PCIe card slot D525MW adding SSD

[Neocro]

I made small NAS for home usage with old D525MW board . It has PCI Express Mini Card slot and i have mSata SSD witch i'm trying to connect. Is there any adapter that would do trick ? Or sata adapter so i switch disk to this slot and use another adapter for mSata to Sata??

Board allso support
USB front panel header with Intel Z-U130 USB Solid-State Drive (or compatible device) support
if that helps

tnx in advance

 

[popatim]

I don't know if it would actually work or not:
https://www.ebay.com/itm/Replacemen...697939?hash=item5b50af6d13:g:vBUAAOSwrQ5cF3SK

 

[Neocro]

Yes i have same doubts. I stumble on that few days ago but i'm not sure will it work.
I contacted several ebayu sellers with question "will it work" none of them answerd to me 🙁
I was kinda hoping someone here will know or had better solution then me

 

[Neocro]

What do you think about this ?
will this work if i put mSata disk in mSata to sata adapter ?

https://www.aliexpress.com/item/4000594720396.html

will this work on this slot ? (also no replay from seller)

 

[Neocro]

Any1?

 

[USAFRet]

Why not a mSATA -> SATA adapter?
https://www.amazon.com/ELUTENG-Enclosure-3050mm-Adapter-Compatible/dp/B07258BJJF

 

[Neocro]

Because i have only 2 sata connectors and i connected 2 disk drives for storage

 

[Neocro]

Small update. I recived item from ebay

But its not working so i stumbled on similar problem on one forum and found solution

I needed to solder 2 pins together and now works perfect

u can use now any type of card (Mini PCIe 1394a+b, USB 3.0, SATA II, SATA III, Ethernet, 422/485, Serial, Serial + Parallel).

 

[yazeed1981]

If i were you i would do the soldering on the card not the motherboard 😉

 

[Neocro]

i done soldering on card not a board