Phanteks Eclipse P400 Front Panel Connector?

[IndieBlue]

Hi everyone,

I'm having problems locating where to plug in the front panel connectors for this case. Unlike most cases where the power switch, power LED and HDD LED have separate connectors, in this particular case, it has a single "12v input" connector. I can't seem to find any place on my motherboard (Asus A88XM-A) where it can fit.

Diagram of this connector can be found on page 10 in the manual here: http://www.phanteks.com/assets/manuals/PH-EC416P_Western.pdf
Image of connector (on the left): http://images.bit-tech.net/content_images/2016/02/phanteks-eclipse-p400s-review/p400s-13b.jpg

 

[LucAlvim]

Hi everyone,

I'm having problems locating where to plug in the front panel connectors for this case. Unlike most cases where the power switch, power LED and HDD LED have separate connectors, in this particular case, it has a single "12v input" connector. I can't seem to find any place on my motherboard (Asus A88XM-A) where it can fit.

Diagram of this connector can be found on page 10 in the manual here: http://www.phanteks.com/assets/manuals/PH-EC416P_Western.pdf
Image of connector (on the left): http://images.bit-tech.net/content_images/2016/02/phanteks-eclipse-p400s-review/p400s-13b.jpg

I have taken a look at the ASUS site - https://www.asus.com/Motherboards/A88XMA/specifications/
Looks like it does have a 4 pin 12V connector...

 

[LucAlvim]

oh sorry i didnt take a look at the connector, its not 4pin