Question Phantkes Y-splitter issue

[ZenexMan]

Hey there, I have this Y-Splitter:
http://www.phanteks.com/Fan-Splitters.html
And these fans:
http://www.phanteks.com/PH-F120SK-DRGB.html

The case came with 3 of these but i installed one in the back too as an exhaust. My issue is that my 3 fans that came with the case are all in 1 cable and it does not fit into the y splitter, its like the same size as the y splitter and the y splitter seems to only connect to 3 pins instead of 4. I only have 1 sys fan header and my mobo is a MSI A320M pro (im on a huge budget and couldnt get a better mobo) Any alternative y splitters or fixes?

 

[RubberyPineapple]

If you don't mind them running at full speed, you could get a molex to 3 fan cable.

 

[ZenexMan]

If you don't mind them running at full speed, you could get a molex to 3 fan cable.

can ya send a link for one?

 

[RubberyPineapple]

can ya send a link for one?

Check this out on @Newegg: Rosewill LP43TX4-12 1 ft. 4-pin Molex LP4 to Three(3) x 4-pin TX4 PWM Fan Power Splitter Adapter Converter Cable with One TX4 Female for RPM Feedback https://www.newegg.com/p/N82E168124...m_mmc=snc-social-_-sr-_-12-492-101-_-11282020

 

[ZenexMan]

Check this out on @Newegg: Rosewill LP43TX4-12 1 ft. 4-pin Molex LP4 to Three(3) x 4-pin TX4 PWM Fan Power Splitter Adapter Converter Cable with One TX4 Female for RPM Feedback https://www.newegg.com/p/N82E168124...m_mmc=snc-social-_-sr-_-12-492-101-_-11282020

nah, I found out that phanteks sent me a 3 pin splitter and not 4, thanks though