Phenom 1045t Oc

[tcr630]

Has anybody reached 4ghz on there phenom 1045t also what issue didnyou have and is it possible. Currently able to get 3.8 stable

 

[dariens007]

as far as i know about overclocking it's really a luck of the draw with the CPU you get. also increases the voltage in small increments until you get a stable overclock can help but dont increase it past the recommend max voltage

Edit: Also what are your temps? and are you using Air or watercooling, improving your colling will also help achievce a higher stable overclock

 

[tcr630]

as far as i know about overclocking it's really a luck of the draw with the CPU you get. also increases the voltage in small increments until you get a stable overclock can help but dont increase it past the recommend max voltage

Edit: Also what are your temps? and are you using Air or watercooling, improving your colling will also help achievce a higher stable overclock

 

[tcr630]

I have the voltage set to automatically increase with frequency but as soon as I pass 3.9ghz it will boot but then restart. I'm using liquid I usually won't see temps over 37c max load for about 8hrs with this said the stock clock is 2.7ghz. Have I hit a brick wall

 

[tcr630]

as far as i know about overclocking it's really a luck of the draw with the CPU you get. also increases the voltage in small increments until you get a stable overclock can help but dont increase it past the recommend max voltage

Edit: Also what are your temps? and are you using Air or watercooling, improving your colling will also help achievce a higher stable overclock

 

[tcr630]

as far as i know about overclocking it's really a luck of the draw with the CPU you get. also increases the voltage in small increments until you get a stable overclock can help but dont increase it past the recommend max voltage

Edit: Also what are your temps? and are you using Air or watercooling, improving your colling will also help achievce a higher stable overclock