Phenom 965BE Non clocked overheating rly hard.

[DexteN]

http://i.imgur.com/LTCTbvn.jpg
Can anyone tell me what's wrong with this? I am literally not running anything atm and im running at 110C? I have chagned the thermal paste like a month ago it was running fine for about a week or so and then same thing. Sometimes the fan goes rly hard sounds like a helicopter sometimes it doesnt. When it kicks in the temp drops to 80c and i can play anything without PC Crashing.

 

[helpstar]

cooler still in place? Something loosened? Fan is spinning?

Use AMD overdrive to check temperature margin while running prime

 

[DexteN]

Cooler is in place, Fan i speeding there is a tiny bit of dust below the fan but not that much.

 

[DexteN]

5 minutes ago it went up to 120c and it shut down without running anything.

 

[jaslion]

5 minutes ago it went up to 120c and it shut down without running anything.

Shutdown your pc reapply the cooler with new thermal paste and see what that gives. Right now you are killing your pc.

 

[DexteN]

thermal margin -17.5

 

[DexteN]

5 minutes ago it went up to 120c and it shut down without running anything.

Shutdown your pc reapply the cooler with new thermal paste and see what that gives. Right now you are killing your pc.

changed the thermal paste like a month ago

 

[helpstar]

change it again, something is really not fine with the cooling.

How did you apply the paste? Too much or too less of it can be problematic.
Did you clean the surface of the cooler and the CPU before applying TP (thermal paste) and installing the cooler again?
Which TP is it you were using?

I´m quite sure your cooler is not mounted correctly/tightly enough. Which one is it? The boxed cooler from AMD or third party one?

 

[DexteN]

change it again, something is really not fine with the cooling.

How did you apply the paste? Too much or too less of it can be problematic.
Did you clean the surface of the cooler and the CPU before applying TP (thermal paste) and installing the cooler again?
Which TP is it you were using?

I´m quite sure your cooler is not mounted correctly/tightly enough. Which one is it? The boxed cooler from AMD or third party one?

I am pretty sure it's mounted correctly. I applied it using the X method. Check this out tho.
http://i.imgur.com/4HafYqW.jpg Something isn't right. I can send you pictures from the overdrive as well. + I have decreased the voltage to 1.375.

 

[jaslion]

change it again, something is really not fine with the cooling.

How did you apply the paste? Too much or too less of it can be problematic.
Did you clean the surface of the cooler and the CPU before applying TP (thermal paste) and installing the cooler again?
Which TP is it you were using?

I´m quite sure your cooler is not mounted correctly/tightly enough. Which one is it? The boxed cooler from AMD or third party one?

I am pretty sure it's mounted correctly. I applied it using the X method. Check this out tho.
http://i.imgur.com/4HafYqW.jpg Something isn't right. I can send you pictures from the overdrive as well. + I have decreased the voltage to 1.375.

I still recommend you do it again because there is just something wrong with either the cooler or the mounting.

 

[DexteN]

change it again, something is really not fine with the cooling.

How did you apply the paste? Too much or too less of it can be problematic.
Did you clean the surface of the cooler and the CPU before applying TP (thermal paste) and installing the cooler again?
Which TP is it you were using?

I´m quite sure your cooler is not mounted correctly/tightly enough. Which one is it? The boxed cooler from AMD or third party one?

I am pretty sure it's mounted correctly. I applied it using the X method. Check this out tho.
http://i.imgur.com/4HafYqW.jpg Something isn't right. I can send you pictures from the overdrive as well. + I have decreased the voltage to 1.375.

I still recommend you do it again because there is just something wrong with either the cooler or the mounting.

Why it doesn't show the CPU Fan speed's RPM? Do you have any idea?
Edit: Now for some reason just joined DotA2 Fan kicked in and it dropped to 70C. I don't understand it 😀

 

[helpstar]

Maybe it´s no PWM fan you are using or it´s wrongly connected or the fan spins just sometimes

 

[DexteN]

Maybe it´s no PWM fan you are using or it´s wrongly connected or the fan spins just sometimes

It spins already i have opened the case so i can see how it's running. I couldnt start the PC for about hour. I had no screen. So i left it like this and i took a shower when i came back i restarted the PC And now it runs smooth again. Playin or doing anything at 70C-80C. But the first time when i booted the PC today it went of after the loading screen and the CPU was really hot again.

 

[helpstar]

any tools running to overclock or tuning the system?

clear the cmos

eventually update the bios in bios itself, but don´t flash it in windows!!

could also be that your cpu or motherboard is failing

 

[DexteN]

any tools running to overclock or tuning the system?

clear the cmos

eventually update the bios in bios itself, but don´t flash it in windows!!

could also be that your cpu or motherboard is failing

Found the problem and i'm giving you best answer. When i push the fan it starts spinning faster.

 

[helpstar]

thanks, glad you solved your problem