I'm completely new to overclocking. So far in bios (did not use software) i bumped up my processor to x18 multiplier and raised the voltage to 1.3250 V. This appears to be stable. Ran Prime95 for about 30 minutes and my core temps were stable around 50-53C
Is there anything else i should change or look into changing to possibly push more power out of my CPU or will those small changes alone successfully push enough power out of my CPU to make a difference?
With the computer i built being 4 years old i thought i could use a bit of a bump.
Other specs:
Ram: 8GB DDR3-1600 G Skill
Motherboard: Biostar ta890gxe
CPU cooler: Coolermaster Hyper 212 EVO with two enermax fans in push pull setup
PSU: Corsair 750w
GPU: XFX Radeon 5770
Is there anything else i should change or look into changing to possibly push more power out of my CPU or will those small changes alone successfully push enough power out of my CPU to make a difference?
With the computer i built being 4 years old i thought i could use a bit of a bump.
Other specs:
Ram: 8GB DDR3-1600 G Skill
Motherboard: Biostar ta890gxe
CPU cooler: Coolermaster Hyper 212 EVO with two enermax fans in push pull setup
PSU: Corsair 750w
GPU: XFX Radeon 5770