PIII 1.2 temp: 38 start, 42-44 average = normal?

[Uone]

Is 42-44 celsius average temp for a PIII 1.2? Hopefully I'm not putting unneccessary strain on the CPU. It's using an Antec CPU Cooler HSF.

 

[vetplus40]

Im certainly not an expert,but from what I have seen those temps look o.k.........

If ya don't ask..How ya gonna know.

 

[Uone]

Whew. Thanks.

 

[Unolocogringo]

If that is a P3 with 512k cache those are very good temps. Nothing to worry about.

I aint signing nothing!!!

 

[peter21]

My P3 1000 @ 11009 runs between 40-46 degrees celsius usually so i think you are ok. I used to run in the 30's before i overclocked it.

--------
The only thing i know...

is that i know nothing at all.

 

[Artanis]

The guy from where i bought my CPU from told me once that I should worry if my CPU heats up to about 55*C.
That sounds resonable to me.

 

[Crashman]

You want to see some good temps for a high clock? Go to <A HREF="http://www.crashmania.tk" target="_new">http://www.crashmania.tk</A> and look at the screenshot of my old Coppermine/stock Intel cooler!

<font color=blue>You're posting in a forum with class. It may be third class, but it's still class!</font color=blue>

 

[Dark_Archonis]

It seems a bit high, but it's fine. Usually, 1.2 P3's range from 35-40 celsius. I'm running a 1Ghz P3 coppermine, and I get 30 idle, 35 celsius full load on a stock fan.

- - -
<font color=green>All good things must come to an end … so they can be replaced by better things! </font color=green>