PIII 667EB on 100MHz FSB OK?

konige

Distinguished
May 15, 2001
5
0
18,510
0
I have an Asus P2B MB(440BX, PII 300, Slot1) system. I want to sell it to build a new one. Before I do, I'd like to upgrade the processor to a PIII. I've searched Pricewatch and the best deal seems to be the PIII667EB($111 boxed).
What I want to verify is if this cpu will work correctly on a 100MHz FSB clocked @ 650MHz multiplier? I'm pretty sure it will since this is below its specs. I just want to make sure there isn't something I'm not seeing before making the purchase. The PIII 550E/600E/650E/700E (boxed) all average around $130. That's why I'm going for the 133MHz FSB cpu.
 
G

Guest

Guest
just overclock your BX board to 133mhz. That will do the trick. The P3 666 is multiplier locked.
 
G

Guest

Guest
The 667 EB is a 133fsb CPU and has 5x mulitiplier, if you run it at 100mhz fsb the cpu will be running at 500Mhz. That would be a waste if you ask me. The 650E 100fsb cpu is only $96 (oem) on pricewatch I would just get that.


Relax, its only ONES and ZEROS!
 

konige

Distinguished
May 15, 2001
5
0
18,510
0
jenspetersen - thanks, but I don't want to go above the specs of the 440BX's 100MHz and the PC100 SDRAM. It's not something I want to support after I sell it.

everett6 - Thanks, that's exactly what I needed to know. I forgot about the PIII667EB being multiplier locked at 5x. I had a feeling I was overlooking something. Thanks again for the heads up.
 

Crashman

Polypheme
Dec 31, 2007
48,327
0
65,960
74
YOu might want to consider the PIII 700, it is still very inexpensive ($98 on pricewatch) or the 750 ($99 on Pricewatch) is an even better deal. They will run full speed at 100MHz bus speeds.

Cast not thine pearls before the swine
 
Thread starter Similar threads Forum Replies Date
V CPUs 2
I CPUs 6

Similar threads