- Nov 5, 2015
- 74
- 0
- 4,630
Im a entry level teenage Pc enthusiast and gamer, and im planning to create a mid end; mid to high performance pc, ive already picked parts, but i would like feed back on said parts and some suggestions, advice and opinions on what would be cost-effective form others experiences.
Ill be using this build as a all around work-space/ semi-gaming rig, so im going for power, A TON of storage space and lots of ram and vram, I record game-play so i want it to be capable of light video editing and rendering as well.
here are the specs.
my maximum budget for the build at the moment is $750- $850 USD what i intend to do is build the rig bare bones with only what i need to run it, and have it still be stable; ill then add an extre $200 to it later on to top it off.
CPU: AMD FX-8350
im pretty set on using this processor, due to the fact that i do want to go over about $180 on just the processor
CPU Cooler:Corsair H80i
im pretty set on having a closed loop pre-built cooling system; and im still decideing over the H80i, H55 And the H75, but im willing to flex on it, although i rather not breach $120 on that.
Motherboard: Gigabyte GA-990FXA-UD3 ATX AM3+
Ive go my heart set on this board and want to build my system here; as it has all the peripherals i want for optimal expand-ability
RAM: Kingston HyperX Fury Black 16GB
i Would Like to have two sticks of 8 gigs to leave room to upgrade to 32GB, but if i have to i settle for 8GB of any ram that is compatible with these parts.
Graphics card: GT 740 4GB Superclocked
again; i rather not cap $140 but ill flex some.
Storage: i would like a 240GB SSD for The OS but will likely end up settling for a 120GB SSD. Im set on having a secondary 1TB HDD or SDHDD.
PSU: Im open to any Power supply capable of running this rig. ive chosen a 650W for now.
CASE: Ivepicked the Azza GT1 ATX and Azza Genesis 9000W, as they both have alot of what i want in a case, Large full tower, with at least 6 5.25 bays, lots of space, headers for a top mounted radiator, plenty of mounting points for fans, but not alot of Storage drive space (not muit disk mounts or racks). just inn case i have trouble obtaining one of these cases or change my mind ive shosen the Rosewill THOR V2 in Black (Covers all my bases, but i dont like its aesthetics) , as my back up case, and if all else fails i settle for a Corsair Obsidian Series 750D (only three 5.25 bays, but plenty of fan headers and HDD Cadges).
Here's a link to the pc part picker i made from these parts for your convenience.
http://pcpartpicker.com/p/VKFVNG
Ill be using this build as a all around work-space/ semi-gaming rig, so im going for power, A TON of storage space and lots of ram and vram, I record game-play so i want it to be capable of light video editing and rendering as well.
here are the specs.
my maximum budget for the build at the moment is $750- $850 USD what i intend to do is build the rig bare bones with only what i need to run it, and have it still be stable; ill then add an extre $200 to it later on to top it off.
CPU: AMD FX-8350
im pretty set on using this processor, due to the fact that i do want to go over about $180 on just the processor
CPU Cooler:Corsair H80i
im pretty set on having a closed loop pre-built cooling system; and im still decideing over the H80i, H55 And the H75, but im willing to flex on it, although i rather not breach $120 on that.
Motherboard: Gigabyte GA-990FXA-UD3 ATX AM3+
Ive go my heart set on this board and want to build my system here; as it has all the peripherals i want for optimal expand-ability
RAM: Kingston HyperX Fury Black 16GB
i Would Like to have two sticks of 8 gigs to leave room to upgrade to 32GB, but if i have to i settle for 8GB of any ram that is compatible with these parts.
Graphics card: GT 740 4GB Superclocked
again; i rather not cap $140 but ill flex some.
Storage: i would like a 240GB SSD for The OS but will likely end up settling for a 120GB SSD. Im set on having a secondary 1TB HDD or SDHDD.
PSU: Im open to any Power supply capable of running this rig. ive chosen a 650W for now.
CASE: Ivepicked the Azza GT1 ATX and Azza Genesis 9000W, as they both have alot of what i want in a case, Large full tower, with at least 6 5.25 bays, lots of space, headers for a top mounted radiator, plenty of mounting points for fans, but not alot of Storage drive space (not muit disk mounts or racks). just inn case i have trouble obtaining one of these cases or change my mind ive shosen the Rosewill THOR V2 in Black (Covers all my bases, but i dont like its aesthetics) , as my back up case, and if all else fails i settle for a Corsair Obsidian Series 750D (only three 5.25 bays, but plenty of fan headers and HDD Cadges).
Here's a link to the pc part picker i made from these parts for your convenience.
http://pcpartpicker.com/p/VKFVNG
Facebook
Twitter
Instagram