Playclaw won't show GPU temp

[btr999]

I am using playclaw overlay to show CPU, GPU and Memory info.
But it doesn't work for my new gpu GIgabyte GTX 980TI Xtreme Waterforce.
This card comes with its own liquid cooler. I am using liquid cooler for cpu as well but the cpu info shows up on overlay.
So I am not sure if this is a incompatibility of playclaw with gigabyte gpu or I missed out something during installation?

 

[13thmonkey]

just use afterburner or precision x and turn overlay on, heard of very few having trouble with that, never heard of playclaw.

 

[COLGeek]

Another consideration is this, did you installed Playclaw (I, too, have never heard of this tool), was it before or after you installed the GTX 980 Ti? Sometimes, monitoring applications installed BEFORE a hardware change will not be aware of the sensors on a new device. Re-installing the application AFTER the physical installation of new hardware can resolve this issue. Not always, but worth a shot if you want to continue using Playclaw.

Good luck.

 

[13thmonkey]

And if it is for recording, the nvidia's tools might be better and use fewer resources.

 

[btr999]

And if it is for recording, the nvidia's tools might be better and use fewer resources.

Streaming, recording, teamspeak overlay and others. Playclaw is quite convenient with one software i can do streaming, recording, teamspeak overlay, system info, fps and a lot more plugins.

 

[btr999]

Another consideration is this, did you installed Playclaw (I, too, have never heard of this tool), was it before or after you installed the GTX 980 Ti? Sometimes, monitoring applications installed BEFORE a hardware change will not be aware of the sensors on a new device. Re-installing the application AFTER the physical installation of new hardware can resolve this issue. Not always, but worth a shot if you want to continue using Playclaw.

Good luck.

thanks. I reinstalled and now it shows correctly.