Please Help. Connecting Ipower X2.0 case to new build

[ben1215]

Ok so i managed to come across a Packard Bell Ipower X2.0 case for a very cheap price. This is normally a prebuilt system. I decided to make a new build out of it. The top of the case features a series of connectors (USB x 4, eSATA, Headphone, Mic, SD card etc. This seems to connect to the motherboards USB slots (sorry dont know their technical name) The motherboard is an Asus P7P55D. I cant seem to get these last components working at all, the build runs fine. The annoying thing is that these connectors are also linked to a system of red LEDs that really makes the case look good. Any ideas on how to get these connectors and LEDs working?

 

[rolli59]

You will need a case manual (service manual in this case) along with your motherboard manual to get the pins correct.

 

[ben1215]

Thats the thing as the case is from a pre-built computer I dont have a manual for it :S

 

[ben1215]

You will need a case manual (service manual in this case) along with your motherboard manual to get the pins correct.

Thats the thing as the case is from a pre-built computer I dont have a manual for it :S

 

[rolli59]

Well sometimes they have markings on the connectors that you can relate to the motherboard. Maybe this will help http://www.pcguide.com/proc/config/mbcase-c.html