Question !!PLEASE HELP!! CPU Ez debug flashes once then turning off!

[ConnerZhao]

Hi, I just delided my i5-8600k and the whole process went smoothly. But when I try to start my PC the ez debug light flash once then turned off. I am really confused and I’ve checked for bent pins(there were non) tried using one stick ram, reseted bios, booting with intergrated graphics, and plugging and replugging the 8 pin cpu power connector. Nothing works, I suspect the cpu or motherboard could be damaged in the process but I feel there is no way they could be damaged. BTW ez debug flashes upon booting(same trouble as this) happened before but it was fixed with simple bios reset!
PLEASE HELP
I5-8600k
Deep cool captain 240ez
Geil-16g ddr4 3200 ram
MSI Z370-A Pro
Zotac 1080 amp
Evga bronze 650w

 

[ConnerZhao]

Here is a video to the issue

View: https://youtu.be/T6jPvkPzqh4

 

[NightHawkRMX]

Do you have another CPU to test with?

I would try clearing CMOS
https://www.intel.com/content/www/us/en/support/articles/000025368/processors.html
Also, make sure something is plugged into the CPU fan or sometimes that can cause a no boot.

 

[ConnerZhao]

Do you have another CPU to test with?

I would try clearing CMOS
https://www.intel.com/content/www/us/en/support/articles/000025368/processors.html
Also, make sure something is plugged into the CPU fan or sometimes that can cause a no boot.

Do you have another CPU to test with?

I would try clearing CMOS
https://www.intel.com/content/www/us/en/support/articles/000025368/processors.html
Also, make sure something is plugged into the CPU fan or sometimes that can cause a no boot.

Yea something is plugged in to the cpu fan also I did clear cmos and non of it worked, thanks for replying

 

[NightHawkRMX]

I believe you may have borked the CPU.

 

[ConnerZhao]

I believe you may have borked the CPU.

Maybe but this same thing happened before also when I unplugged the 8 pin cpu power the pc turned on with the the cpu ez debug led light up

 

[NightHawkRMX]

That's because the cpu wasn't getting power so the cpu didn't work.

Now it doesnt work for another reason likely.

 

[ConnerZhao]

That's because the cpu wasn't getting power so the cpu didn't work.

Now it doesnt work for another reason likely.

I probably broke my cpu thanks for replaying tho

 

[Nono Nueti]

I had the same problem of the EZ Debug CPU light flashing once then powering everything off. What ended up fixing it for me was simply unplugging a cable I had connected to the "system fan" pins on the motherboard. After I unplugged that, the fans still run normally, but everything started working.