Hi i have recently purchased a JideTech HDMI 2-port KVM switch in the hopes of connecting my macbook and my PC to the same monitor, while being able to switch between them with a single click. Unfortunately this KVM switch on booting won't recognize my GTX 1070. It will however recognize the onboard graphics.
I have tried forcing the PCI-E to the videocard on the bios but that didn't seem to work.
Important fact: If I connect the graphics card directly to the monitor without the switch it works fine. But for some reason going through the switch does not work.
Specs:
1070 GTX
Intel 6700k
asus Z170 Pro gaming aura
27 inch acer monitor
2 corsair 8gb ram
Any help would be appreciated
I have tried forcing the PCI-E to the videocard on the bios but that didn't seem to work.
Important fact: If I connect the graphics card directly to the monitor without the switch it works fine. But for some reason going through the switch does not work.
Specs:
1070 GTX
Intel 6700k
asus Z170 Pro gaming aura
27 inch acer monitor
2 corsair 8gb ram
Any help would be appreciated
Last edited: