Please help me doing a little overclock to i5 4690K. I'm new!

[Joel Oberlin]

Hey folks,

I have a i5 4690k and Asus Sabertooth Z97 Mark2 and DeepCool Maelstrom 240T. The Turbo mode has been enabled since the first day, but I noticed that it puts the voltage to 1.130v and I think it's a little bit higher considering that at 3.5 (stock) the voltage is about 1.025 just for 400mhz. I'd like you to help me to achieve just 4ghz without touching the voltages, I mean, Can I get 4ghz leaving the voltage to 1.0**? Because for now I dont want a huge overclock, but I also want to down the voltage since I think is uneccesary just for 400mhz. Can you help me to set the values in the Asus Bios? I'm new and I dont know really much the Ai Tweaker.... Thank you!

 

[Gmesh]

This helped me overclock my g3258: http://www.overclock.net/t/1411077/haswell-overclocking-guide-with-statistics Give this a good read as it has pretty much all the information that you'd need and then some.

Not sure why you'd want to undervolt your CPU @ 1v but you SHOULD be able to get 4.0GHz pretty easy with STOCK voltages from what i've been reading (Stock Turbo IS 3.9GHz after all).

 

[Joel Oberlin]

This helped me overclock my g3258: http://www.overclock.net/t/1411077/haswell-overclocking-guide-with-statistics Give this a good read as it has pretty much all the information that you'd need and then some.

Not sure why you'd want to undervolt your CPU @ 1v but you SHOULD be able to get 4.0GHz pretty easy with STOCK voltages from what i've been reading (Stock Turbo IS 3.9GHz after all).

Thanks for the reply. Maybe I wasn't clear, but I don't want to undervolt, I was saying that I would like to get 4Ghz using the stock voltage, since in my opinion the turbo mode increases the voltage a little bit high (and more temps) just for a gain of 400mhz.

To sum up, I'd like to get about 3.9 or 4 ghz (I dont need more) using a voltage of 1.088 for example. I'll read the guide!