- Apr 5, 2009
- 119
- 0
- 18,680
CASE: NZXT TEMPEST
PSU: CORSAIR HX-1000
CPU: INTEL Q6600 GO 3.0ghz (lapped)
GPU: EVGA GTX 285 x2 SLI 700/1594/1242
MB: EVGA 750i SLI FTW
RAM: CORSAIR XMS2 8gb 800mhz
HS: MASSCOOL 8WA741 (lapped because i could)
HDD: SEAGATE 500gb
OS: Windows VISTA ULTIMATE x64
CPU Temps: 35-40 idle / 50-60 load
GPU Temps: 40 idle / 60 load
After many hour of research I overclocked my cpu to 3.0ghz plan on seeing 3.7ghz when my xigmatek arrives. anyways 1.325v and 1333 fsb did it. cpu fsb 1.40 volts multiplier at 9 and fsb/ram unlinked. ram at 800mhz.
i was told at 400mhz that 1.25 volts is all it takes. I assume muplier is at 8 then....?
(anyways thoughts and advice are welcome) thank you for taking your time to read this and help me through my first overclock
PSU: CORSAIR HX-1000
CPU: INTEL Q6600 GO 3.0ghz (lapped)
GPU: EVGA GTX 285 x2 SLI 700/1594/1242
MB: EVGA 750i SLI FTW
RAM: CORSAIR XMS2 8gb 800mhz
HS: MASSCOOL 8WA741 (lapped because i could)
HDD: SEAGATE 500gb
OS: Windows VISTA ULTIMATE x64
CPU Temps: 35-40 idle / 50-60 load
GPU Temps: 40 idle / 60 load
After many hour of research I overclocked my cpu to 3.0ghz plan on seeing 3.7ghz when my xigmatek arrives. anyways 1.325v and 1333 fsb did it. cpu fsb 1.40 volts multiplier at 9 and fsb/ram unlinked. ram at 800mhz.
i was told at 400mhz that 1.25 volts is all it takes. I assume muplier is at 8 then....?
(anyways thoughts and advice are welcome) thank you for taking your time to read this and help me through my first overclock
Facebook
Twitter
Instagram