Question PLED wires with molex

[PortAh]

The case comes with PLED wires(green/white) with a molex connector.
I want to connect it to the mobo 2-pin.

I am thinking to just replace the molex connector with this connector in the pic attached.

Can someone tell my where to get these connectors and how to call this type of plug?

Thanks.

 

[rgd1101]

read the motherboard manual

 

[PortAh]

what's your point? Motherboard manual wont tell me how to replace the case PLED wire molex connector with the needing connectors, will it?

 

[bignastyid]

What case are you using?

 

[PortAh]

Diablotek Epic ATX. It has molex connector for the PLED(green/white) wires.

It seems that many Rosewill cases also come with PLED wires terminated with 4-pin molex connector(2-pin used). It looks like a common issue.
I would think the easiest is to replace the connector myself with the ones in pic above. But I have a hard time finding it on ebay. Search up "2-pin jumper or plug" comes up tons of unrelated plugs that dont look correct.
That's why I ask.

 

[bignastyid]

https://www.primochill.com/products/mod-smart-2-8mm-switch-wire-harness-4-x-2-pin-power-switch-led