Specs:
MSI B75A-G43 Gaming
i7-2600K
4x4 G.Skills Sniper DDR3 1333MHz
RM 650X 80+ Gold PSU
Backstory:
3 days ago I tried overclock my 2600K again since last year. I changed the cpu ratio to 38 and ram voltage to 1.6. The PC didn't boot and the monitor, keyboard and mouse had no signal. I unplugged the PC and held the power button for 30s and left it running. The PC runs, then restarts once or more after 5sec or up to 10mins, then the keyboard, mouse and monitor receive a signal and the PC posts. When it does boots up, there's no issue with performance and everything works fine.
Solutions I Tried:
I went into the BIOS and loaded the default settings back and deleted all overclocking profiles. I had cleared the CMOS many many times. The longest it was out was up to 1.5hrs. I reassembled everything, used different RAM modules and SATA ports. I also re-installed Windows 10 3x and updated all drivers. But, the PC still takes a long long time to boot after I shut it down. Sometimes, it boots normally when I restart, but not always.
Any ideas why this is happening and any other solutions?
MSI B75A-G43 Gaming
i7-2600K
4x4 G.Skills Sniper DDR3 1333MHz
RM 650X 80+ Gold PSU
Backstory:
3 days ago I tried overclock my 2600K again since last year. I changed the cpu ratio to 38 and ram voltage to 1.6. The PC didn't boot and the monitor, keyboard and mouse had no signal. I unplugged the PC and held the power button for 30s and left it running. The PC runs, then restarts once or more after 5sec or up to 10mins, then the keyboard, mouse and monitor receive a signal and the PC posts. When it does boots up, there's no issue with performance and everything works fine.
Solutions I Tried:
I went into the BIOS and loaded the default settings back and deleted all overclocking profiles. I had cleared the CMOS many many times. The longest it was out was up to 1.5hrs. I reassembled everything, used different RAM modules and SATA ports. I also re-installed Windows 10 3x and updated all drivers. But, the PC still takes a long long time to boot after I shut it down. Sometimes, it boots normally when I restart, but not always.
Any ideas why this is happening and any other solutions?