Power button options

Status
Not open for further replies.
Sep 16, 2018
1
0
10
Hello
Please kindly assist me my Asus laptop model X555L
When l put my laptop on sleep l find it difficult to start it again the power button does not work even if l long press it
even if the screen locks it's difficult to to start it when pressing the power button
What could be the problem
 
Solution
Try updating the power management drivers.

First make sure that the laptop is using the most current version of the power management software. If not, update the drivers. Follow these steps:

1. Go to "Control Panel" and then click "Device Manager".

2. Double click and open "System Devices".

3. Right-click "Microsoft ACPI-Compliant System".

4. Now choose "Update Driver Software".

5. Carefully read all the instructions onscreen.

You may wish to also repeat these instructions, but right-click "Microsoft ACPI-Compliant Embedded Controller" in Step 3. (if located on your system)

If this doesn't work, you may need to go to the laptop manufacturer’s website and search their support section and locate any new power management drivers...
Try updating the power management drivers.

First make sure that the laptop is using the most current version of the power management software. If not, update the drivers. Follow these steps:

1. Go to "Control Panel" and then click "Device Manager".

2. Double click and open "System Devices".

3. Right-click "Microsoft ACPI-Compliant System".

4. Now choose "Update Driver Software".

5. Carefully read all the instructions onscreen.

You may wish to also repeat these instructions, but right-click "Microsoft ACPI-Compliant Embedded Controller" in Step 3. (if located on your system)

If this doesn't work, you may need to go to the laptop manufacturer’s website and search their support section and locate any new power management drivers for your laptop make and model.

IMPORTANT NOTE: Do not remove any ACPI entries. Doing so may disable some of your laptop’s power management features, such as the ability to put it to sleep by pressing the Power button. It is also a tad complicated to reinstall those features, so best to avoid the problem all together.


You may also want to try this...

1. Go into "Control Panel" and click the "Power Options".
2. Next to the plan that is currently selected click "Change Plan Settings".
3. Now click "Change Advanced Power Settings".
4. Open the "Sleep Setting" and find "Hybrid Sleep"
5. Change/set it to allow.
6. Now click "Apply" and then click "OK".
7. Finally shut down and power up the computer.
 
Solution
Status
Not open for further replies.