power supply does not have a connection for the cpu!!

[469buddy]

my apevia jp800w atx psu does not seem to have any cable for the CPU power header on my motherboard

i get it's not the best PSU but it's past the time i can return it

is there some adapter i can get for this so it would work with the yellow cords or do I have to get a different psu

 

[The Paladin]

I don't think you understand your power supply, according to https://www.newegg.com/Product/Product.aspx?Item=N82E16817148059 your power supply has a connector for your motherboard it has1 x 4/8 pin + 12V and EPS , now that 8pin connector splits into a 4+4 connector for older boards. split it and use it.,

 

[469buddy]

i don't see anything to split

 

[helpstar]

which motherboard do you use?

that´s the connector you have at your PSU:
http://apevia.com/images/products/ATX-JP800W-10_500.jpg

This PSU really isn´t what you wanna use, it could burn down your house or just fry your PC components

 

[469buddy]

I'm using msi b350 tomahawk mb
and i still don't know what you're talking about, the psu does not have any 4 pin connectors like that

 

[The Paladin]

okay if you have that motherboard, then your using 8 pin connector and it is located (see picture for location) perhaps your heat sink is blocking the view

 

[helpstar]

Then it´s not the apevia jp800w or it´s a fake PSU
http://apevia.com/ProductsInfo.asp?KEY=ATX-JP800W

if you don´t see the 2x4Pin than use the 8Pin ATX12V/EPS connector

just another PSU, but yours should have these too: https://youtu.be/hQJUNmMmWPc?t=165