Power sw reset sw led hdd and power led +/- help!

[combocarte112]

Hello everybody,
I changed my old motherboard with mih61r mb 10097-1 and I do not know how to put those cables (Power sw, reset sw, led hdd, power led + and power led -), help me please.

 

[jay32267]

Have a look at this and see if it looks like your MB.

https://www.slideshare.net/vitordantasdealbuquerque/manual-kronnus-mih61-m-d

If that's it....it should tell you where to connect things.

 

[shmoochie]

Here is another similar thread with the same mb that was solved: http://www.tomshardware.com/answers/id-3178429/pin-designation-motherboard-mih61r-switch.html

Here is the picture they posted with the solution: https://tse3.mm.bing.net/th?id=OIP.M93f0fde128237893796fb5b2be0ea385o0&pid=15.1&P=0&w=232&h=164

 

[geofelt]

Your motherboard manual will have a diagram of the front panel header pins.
PWR and RST pins are not polarity sensitive.
LED for hdd and cpu are polarity sensitive.
If you connect them backward, no problem, the led will just not light.

An amusing error happens when you connect the cpu led to the reset switch.