Power won’t turn on

[aguilarluis404]

So basically my power won’t turn on. I have checked that the power cable fits nicely into the psu and the switch is on. This is after I replaced my old parts with these newer parts. I think the problem might be the front panel connectors, I don’t think I plugged them in right and It doesn’t show how to in the Manuel.

Specs:
Asus Rog strix z390-e motherboard
Trident Z rgb ram 2 8gb sticks
Intel core I7-9700k
Noctua NH-D15
Gigabyte 1080 ti
600w psu

 

[ThatVietGuy]

The manual most certainly tells you how the front panel connectors are arranged on page 1-20.

What case are you using.

You can try the paper clip trick to see if the PSU is even supplying power - https://www.wikihow.com/Check-a-Power-Supply

 

[aguilarluis404]

Sorry for replying so late.
Ok so my case is a Raidmax Monster II ATX.
I seem to have all the necessary cables as far as I can see. That includes the 24 pin motherboard power cable, 8 pin cpu cable( I only have the 4 pin connected right now), and the cpu fan cooler cable.
The extra cables that are plugged in are the 2 sata cables for my HDD, USB 3.1 cable, audio cable, gpu power cables, and the little front panel connectors.
I found the page(1-20) with the name of the power connectors and plugged them correctly like it said in the manuel, but there is still no power.
I don't want to test the PSU in fear that I may brake something, but it seemed to be working fine the day before I replaced the parts. I mean its only like 1 or 2 years old.

 

[ThatVietGuy]

Why do you only have the 4-pin CPU connected? Connect the 8-pin to the motherboard.

 

[aguilarluis404]

Its because the 8 pin was split into 2 4 pin cables. My old motherboard only had a 4 pin slot.
Ok I plugged the 2 4 pin cables to make an 8 pin cable, but my pc still isn't turning on. I think the power switch might be broken. Is there another way to turn on the pc without the switch?

 

[ThatVietGuy]

https://www.gamersnexus.net/guides/2011-jumping-a-motherboard-without-power-switch-button

 

[aguilarluis404]

Thanks I will try this later.
Hopefully nothing goes wrong.
Is it ok to leave it on or should I turn it off right after?
Also if everything does turn on, could the problem be the power switch?

 

[ThatVietGuy]

You can leave it running, but really it should only be used to determine if the power switch isn't working.

 

[aguilarluis404]

Alright so I tried it with no prevail sadly.
Im afraid it might be a problem with the PSU or motherboard.