Powercolor R9 290x black screening

[DiscoWarlock]

Hey, so I have a Powercolor R9 290x and I've been plauged with the black screen again, my issue only happens when I'm gaming, and the fan goes into overdrive just as it happens along with the temps hitting 90+ degrees. I have tried all the MSI afterburner tinkering and those solutions only last about a week or so before the black screening pops up again, so I was wondering if cooling would be a good solution or just buying a whole new card like a R9 390x or Nvidia equivalent. As for cooling I'd get an NZXT G10 Kraken plus the X41 Liquid cooling system along with extra VRM heatsinks to help. Any help is greatly appreciated, thanks

Note: My system specs are

MSI Z87-45 Gaming Motherboard
Intel I5 4670k LGA 1150 Processor
Kingston Blu Black 2x4 GB DDR3 1600 MHz RAM
PowerColor R9 290x GPU
750 Watt CRX 80 Bronze Power Supply
Kingston HyperX 120GB SSD
Seagate 2 TB HD SATA

I am running Windows 10, and have Crimson 15.12 drivers installed, along with GPU Bios version 015.042.000.000.000000

 

[DiscoWarlock]

Just wanted to provide an update: I have purchased a NZXT G10 with the X41 Liquid Cooling system, along with the extra heatsinks for the VRM and VRam, I will provide an update later on once it arrives and I install it. I'm looking forward to it, as this past weekend my GPU temps hit 93 degrees and caused the game and ultimately, my computer to crash. I'll provide updates once everything is installed and running

 

[DiscoWarlock]

Final update,
All the cooling has been installed, temps don't hit higher than 55 Degrees C, VRM 1 and VRM 2 temps have added heatsinks, and also don't go above 60 under max load. Have yet to suffer a black screen or crash *knocks on wood*