Prescott Temperature Survey--Please reply

Islandtime

Distinguished
Aug 1, 2004
4
0
18,510
I would like to put together a table/listing of Precott CPU temps for comparison. It's a given that these chips run alot hotter than the Northwoods but trying to find info on the "Norm" is hard to do. I think it would help alot of us Prescott users to see where we stand with our operating temps.

If everyone will post their info, I will make a table listing the responces in an easy to compare format. Please use SpeedFan or Motherboard Monitor5 to find your temps. All responses will be greatly appreciated.

Please submit the following info:

CPU type and Stepping - Prescott ONLY
CPU Rated speed
Current FSB setting
Type heatsink used
Board brand, model and chipset:
Bios Version:

Room temperature in degrees C ((farenheight - 32) / 1.8)
CPU Idle temp. in degrees C
CPU Gaming or Benchmarking temp. in degrees C
System temp. at Idle in degrees C
System temp Gaming or Benchmarking in degrees C
 

p5657587

Distinguished
Aug 2, 2004
5
0
18,510
CPU type: Intel Pentium 4 3.4GHz 478 (Prescott)
3.4GHz
800MHz FSB
Stock Fan/Cooler
ASUS P4P800SE
i865PE
BIOS: Latest Beta
Room Temp: 25 C

CPU
Idle Temp: 36 C
Full Load: 47 C

System
Idle Temp: 40 C
Full Load: 51 C
 

phial

Splendid
Oct 29, 2002
6,757
0
25,780
i think your CPU and northbridge temps are backwards, it happens alot with temperature monitoring programs/bios readouts

-------
<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new">please dont click here! </A>
<A HREF="http://www.subhi.com/keyboard.jpg" target="_new">This is you, interweb junky</A>
 

Islandtime

Distinguished
Aug 1, 2004
4
0
18,510
I would have to agree about the temps being swapped. Which of the programs are you using to get the info? Also what tpye of chip is reported as giving you the temp reading ( should be the same in each program)? Usually the #2 chip is the CPU.
 

P4Man

Distinguished
Feb 6, 2004
2,305
0
19,780
> I cant see how you can use 40c air through a fan to cool a
>heater (any cpu acts as a heater) to 36c. It just isn't
>possible.

My physics (and especially my thermodynamics) are more than a bit rusty, but if I'm not mistaken, it is possible (well, in theory). It would imply nearly supersonic airspeeds and/or pretty impressive pressures though :p

= The views stated herein are my personal views, and not necessarily the views of my wife. =
 

endyen

Splendid
Here is a pretty useless piece of aerodynamics for you. At mach 3, most metals get so heated ( air friction) that they flex to the point of being incabable of structural use. I think that at that speed, the exterior of jets reach temps in excess of 1000c. Even below sonic speeds, air friction will cause an object in motion to heat.
 

Kanavit

Distinguished
Jan 6, 2004
390
0
18,780
P4 3.0E SL79L
3006.9 mhz
200.5 mhz
Intel stock cooler
Asus P4P800 Intel i865PE
bios v. 1016

room temp.??? guessing 72f
47.6C idle
62c full load



------
Prescott 3.0E 1MB L2 HT
1GB PC 3200 Dual channel(PAT)
Asus P4P800 Bios 1016
PNY Geforce 6800 GT 256MB DDR3
58,556 Aquamarks
 

phial

Splendid
Oct 29, 2002
6,757
0
25,780
toasty!






-------
<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new">please dont click here! </A>
<A HREF="http://www.subhi.com/keyboard.jpg" target="_new">This is you, interweb junky</A>
 

Crashman

Polypheme
Former Staff
It depends on which way the fan is facing! Normally I prefer the fan to blow downward due to directional flow, but in this case, having the fan blow supersonic airspeed AWAY from the core would cause a low pressure center BEHIND it...cooling the CPU!

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
 

evulboo

Distinguished
Jun 2, 2004
163
0
18,680
Prescott 2.8e C0
2.8
800
hyper6
asus p4s800d (crap)
1006

19c
33c
41c
20c
23c


If u do things right.... People won't be sure you've done anything at all......
 

p5657587

Distinguished
Aug 2, 2004
5
0
18,510
there's little differance between the tempsof CPU and MB, I hardly doubt I switched them.

Someone asked,
I used ASUS pobe, Speed Fan, some bios for support, MBM 5, Sisoft Sandra 2004 Std. and an infrared temp probe for confirming correct MB temp. (Northbridge is passivly cooled)
 

peteroy

Distinguished
BANNED
Jun 14, 2004
280
0
18,790
I have a 2.8E Prescott

Idle: 47C
Load: 51C

When on load, my mobo increases the fan speed if needed.


===========================
<A HREF="http://www.clan-chaos.com" target="_new">clan CHAOS</A>
 

Crashman

Polypheme
Former Staff
A 2.8C will run idle at around 35C and around 47C under full load, with a slower fan and less effective cooler. A D0 or later stepping Prescott would also be cooler than typical Prescotts most people already own. And I'd need those moderate temperatures for overclocking.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
 

Islandtime

Distinguished
Aug 1, 2004
4
0
18,510
Correct me if I'm wrong but the only 800MHz 478 prescott(according ito Intel's web site)that has a DO stepping is the 3.2E. Of coarse there is the 2.8A at 533MHz. It seems that if you want a DO stepping 800MHZ Prescott that you have to go with the 775 package.

I really miss my 2.4C with the stock fan running at 30C idle and 44C full load.
 

phial

Splendid
Oct 29, 2002
6,757
0
25,780
i didnt say YOU switched them, i said that the monitoring programs did

it happens often. besides, i highly doubt your northbridge is running at 50c, but your cpu running at 50 is more realistic

-------
<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new">please dont click here! </A>
<A HREF="http://www.subhi.com/keyboard.jpg" target="_new">This is you, interweb junky</A>
 

Kanavit

Distinguished
Jan 6, 2004
390
0
18,780
like a polar bears nuts.

here are my new temps with new cpu:
P4 3.2E SL7KC
3207.3 mhz
200.5 mhz
Zalman CNPS7000A stock cooler
Asus P4P800 Intel i865PE
bios v. 1016

room temp.??? guessing 72f
45.6C idle
67c full load




------
Prescott 3.2E 1MB L2 HT
1GB PC 3200 Dual channel(PAT)
Asus P4P800 Bios 1016
PNY Geforce 6800 GT 256MB DDR3
60,823 Aquamarks
 

phial

Splendid
Oct 29, 2002
6,757
0
25,780
like a polar bears nuts? your saying that "hot" is really "cold"? .........




o___O"

-------
<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new">please dont click here! </A>
<A HREF="http://www.subhi.com/keyboard.jpg" target="_new">This is you, interweb junky</A>
 

Kanavit

Distinguished
Jan 6, 2004
390
0
18,780
it's toasty warm. :smile:

------
Prescott 3.2E 1MB L2 HT
1GB PC 3200 Dual channel(PAT)
Asus P4P800 Bios 1016
PNY Geforce 6800 GT 256MB DDR3
60,823 Aquamarks
 

Crashman

Polypheme
Former Staff
Intel WILL do exactly 1 of 2 things: Either quit making the 2.8E or switch it to a newer stepping. Intel updates their entire line to a new stepping, so that the only way a 2.8E D0 or newer will never be available is if they stop making the 2.8E very soon.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
 

Islandtime

Distinguished
Aug 1, 2004
4
0
18,510
I am currently getting my spreadsheet together and will post it soon. I have been collecting this same data from 3 different forums.

A big THANKS to everyone that has responded so far. The more replies I get, the easier it is to get a real average for the Prescott.
 

p5657587

Distinguished
Aug 2, 2004
5
0
18,510
Sorry about that, the program seems fine.
When I put the computer on load, temps labeled "CPU" rises much faster than the one labled "MB"
sometimes 3-4 degrees a second. MB temp rises slowly so my conclusions are that the temps are correct.
 

Kanavit

Distinguished
Jan 6, 2004
390
0
18,780
I tried using an aftermarket heatsink fan on my CPU. It made no improvement and the fan made more noise. Intel bundles a high quality heatsink fan with the Prescott.
I found the fan very noisy, especially when at full load. I found a great hsf aftermarket called Zalman CNPS7000A. its pricey, but well worth it. It comes with 92mm fan 2500rpm only dB25. Very quiet , best part is the temps, it went down, only 43c idle and 65c full.

------
Prescott 3.2E 1MB L2 HT
1GB PC 3200 Dual channel(PAT)
Asus P4P800 Bios 1016
PNY Geforce 6800 GT 256MB DDR3
60,823 Aquamarks
 

phial

Splendid
Oct 29, 2002
6,757
0
25,780
what were your temps before the new heatsink?

-------
<A HREF="http://www.albinoblacksheep.com/flash/you.html" target="_new">please dont click here! </A>
<A HREF="http://www.subhi.com/keyboard.jpg" target="_new">This is you, interweb junky</A>
 
G

Guest

Guest
I still like to see that my full load temp is your idle temp! And that my cpu is outperforming yours in everything xept maybe DoomIII!!!
And above all mine is 1year old and considerably cheaper.
Of course I am <b>cheating</b> by overclocking it! ;-)

Asus P4P800DX, P4C 2.6ghz@3.25ghz, 2X512 OCZ PC4000 3-4-4-8, Leadtek FX5900 w/ FX5950U bios@500/1000, 2X30gig Raid0