Specs:
E4300 @ 3.24ghz
2 GB PC-5300 RAM @ 4-4-4-12, ~700mhz (stock is 5-5-5-15)
Nvidia 8800GTS
Corsair HX520
Gigabyte P965-DS3
Vcore is set at 1.412, temps are fine (~40C idle, ~65 load), vDimm is at +0.2, MCH is at +0.1, and FSB is at +0.1.
I can run dual instances of Prime95 for ~9 hours before I get an error on only one of the cores. Is this simply a case of needing to either pull back the FSB or up the Vcore?
Thanks
E4300 @ 3.24ghz
2 GB PC-5300 RAM @ 4-4-4-12, ~700mhz (stock is 5-5-5-15)
Nvidia 8800GTS
Corsair HX520
Gigabyte P965-DS3
Vcore is set at 1.412, temps are fine (~40C idle, ~65 load), vDimm is at +0.2, MCH is at +0.1, and FSB is at +0.1.
I can run dual instances of Prime95 for ~9 hours before I get an error on only one of the cores. Is this simply a case of needing to either pull back the FSB or up the Vcore?
Thanks