H hamlet_jones Distinguished Dec 10, 2010 54 0 18,630 Nov 27, 2018 #1 Seems a tad high, & I'm using the 95w heat-pipe optioned cooler.. (Dell Optiplex 745, Core 2 Duo, E6400 2.13MHz. 8gb ram, 305w PSU.
Seems a tad high, & I'm using the 95w heat-pipe optioned cooler.. (Dell Optiplex 745, Core 2 Duo, E6400 2.13MHz. 8gb ram, 305w PSU.
Solution derekullo Nov 30, 2018 Did you correctly apply thermal paste between the cooler and cpu? The cpu is only a 65 watt so it should not take much cooling.
Did you correctly apply thermal paste between the cooler and cpu? The cpu is only a 65 watt so it should not take much cooling.
derekullo Splendid Jan 25, 2009 2,643 291 22,190 Nov 27, 2018 #2 Are the fans working? Any of them? Also give it a good dusting if you haven't already. Upvote 0 Downvote
H hamlet_jones Distinguished Dec 10, 2010 54 0 18,630 Nov 27, 2018 #3 Yes, cpu & case fan working, loud. Well dusted. Upvote 0 Downvote
derekullo Splendid Jan 25, 2009 2,643 291 22,190 Nov 30, 2018 Solution #4 Did you correctly apply thermal paste between the cooler and cpu? The cpu is only a 65 watt so it should not take much cooling. Upvote 0 Downvote Solution
Did you correctly apply thermal paste between the cooler and cpu? The cpu is only a 65 watt so it should not take much cooling.
H hamlet_jones Distinguished Dec 10, 2010 54 0 18,630 Dec 1, 2018 #5 Yes. But in checking, I discovered the bail arm wasn't locked in place, so I only had contact on the edge of the cpu. All good now. Upvote 0 Downvote
Yes. But in checking, I discovered the bail arm wasn't locked in place, so I only had contact on the edge of the cpu. All good now.