Printing on cloth with Epson 2000P

Toggle sidebar Toggle sidebar
G

Guest

Guest
Archived from groups: comp.periphs.printers (More info?)

Ok, I'm trying to anyway. I've sprayed an archival fixative onto a
piece of 8.5"x11" Epson archival paper for support, and stuck a piece
of muslin the same size onto the paper. The fixative, when only sprayed
on one of the pieces remains repositionable.


Of course the Epson 2000p isn't configured to print on cloth, but the
image always starts to print and, without fail, an error message comes
up telling me to go to the printer's troubleshooting page and attempt
to figure out why the printer keeps bailing on me. I was wondering if
anyone else has tried to print on cloth with their 2000p and if they
have had any success doing so. If so, I would love to hear how you did
it.


Thank you,
Caron
 
Archived from groups: comp.periphs.printers (More info?)

Are you a quilter?
I will not let my wife near my Epson printers.
It is not possible to fix cloth securely enough to a paper backing to
reliably be able to print although you may get one or two useful prints.
However you may also hopelessly gum up your print head.
Older HP printers and some older Canons allow for alternate feeding through
a straighter path and generally will print in the way you are describing.
 
Archived from groups: comp.periphs.printers (More info?)

I've tried the freezer paper, but the paper doesn't seem to adhere to
the cloth very well. Is there a specific kind of freezer paper that you
use? I've been using Reynolds plastic coated freezer paper since that
is all I found when I went to the grocery store.
 
Archived from groups: comp.periphs.printers (More info?)

I know of a quilter who buys paper with fabric bonded on it, prints on it,
then peels off the paper backing. She gets it at a craft store that has
quilting supplies.



--
Dave C.

c9ar9dar9elli@9c4.n9et

Remove the five 9's (leave the 4) for email.


"Caron" <cgonthier@gmail.com> wrote in message
news:1103256866.813528.266620@f14g2000cwb.googlegroups.com...
> Ok, I'm trying to anyway. I've sprayed an archival fixative onto a
> piece of 8.5"x11" Epson archival paper for support, and stuck a piece
> of muslin the same size onto the paper. The fixative, when only sprayed
> on one of the pieces remains repositionable.
>
>
> Of course the Epson 2000p isn't configured to print on cloth, but the
> image always starts to print and, without fail, an error message comes
> up telling me to go to the printer's troubleshooting page and attempt
> to figure out why the printer keeps bailing on me. I was wondering if
> anyone else has tried to print on cloth with their 2000p and if they
> have had any success doing so. If so, I would love to hear how you did
> it.
>
>
> Thank you,
> Caron
>
 
Archived from groups: comp.periphs.printers (More info?)

Yeah, I was using the right side. I was wondering how waxed paper would
work. The problem was that my printer would start printing and then
decide to stop before the printout was complet. I emailed epson and
they told me this:

Please follow the steps below to resolve this issue of incomplete
printouts
in Windows XP:

1. Click on START, CONTROL PANEL, PRINTERS AND FAXES (or PRINTERS AND
OTHER HARDWARE).
2. Right click your printer, and select PROPERTIES. (If your printer
is
not listed, click on VIEW INSTALLED PRINTERS first).
3. Select the ADVANCED tab.
4. Remove the check mark from ENABLE ADVANCED PRINTING FEATURES.
5. Click on APPLY (if applicable), then OK.
6. Restart your computer.
7. Try printing now.

If the issue persists, please try the following:

1. Click on START, CONTROL PANEL, PRINTERS AND FAXES (or PRINTERS AND
OTHER HARDWARE).
2. Right click your printer, and select PROPERTIES. (If your printer
is
not listed, click on VIEW INSTALLED PRINTERS first).
3. Select the ADVANCED tab.
4. Select PRINT DIRECTLY TO THE PRINTER.
5. Click on APPLY (if applicable), then OK.
6. Restart your computer.
7. Try printing now.

I haven't had a chance to try it yet, but I'm keeping my fingers
crossed. Hope it works.

Thanks for the input everyone.
Caron
 
Archived from groups: comp.periphs.printers (More info?)

Yeah, I was using the right side. I was wondering how waxed paper would
work. The problem was that my printer would start printing and then
decide to stop before the printout was complet. I emailed epson and
they told me this:

Please follow the steps below to resolve this issue of incomplete
printouts
in Windows XP:

1. Click on START, CONTROL PANEL, PRINTERS AND FAXES (or PRINTERS AND
OTHER HARDWARE).
2. Right click your printer, and select PROPERTIES. (If your printer
is
not listed, click on VIEW INSTALLED PRINTERS first).
3. Select the ADVANCED tab.
4. Remove the check mark from ENABLE ADVANCED PRINTING FEATURES.
5. Click on APPLY (if applicable), then OK.
6. Restart your computer.
7. Try printing now.

If the issue persists, please try the following:

1. Click on START, CONTROL PANEL, PRINTERS AND FAXES (or PRINTERS AND
OTHER HARDWARE).
2. Right click your printer, and select PROPERTIES. (If your printer
is
not listed, click on VIEW INSTALLED PRINTERS first).
3. Select the ADVANCED tab.
4. Select PRINT DIRECTLY TO THE PRINTER.
5. Click on APPLY (if applicable), then OK.
6. Restart your computer.
7. Try printing now.

I haven't had a chance to try it yet, but I'm keeping my fingers
crossed. Hope it works.

Thanks for the input everyone.
Caron
 
Archived from groups: comp.periphs.printers (More info?)

I have done it with all my Epson printers. Iron a piece of freezer paper to
the back of your cloth and send it through the printer. Works every time
for me. You may need to adjust the paper thickness lever.


"Caron" <cgonthier@gmail.com> wrote in message
news:1103256866.813528.266620@f14g2000cwb.googlegroups.com...
> Ok, I'm trying to anyway. I've sprayed an archival fixative onto a
> piece of 8.5"x11" Epson archival paper for support, and stuck a piece
> of muslin the same size onto the paper. The fixative, when only sprayed
> on one of the pieces remains repositionable.
>
>
> Of course the Epson 2000p isn't configured to print on cloth, but the
> image always starts to print and, without fail, an error message comes
> up telling me to go to the printer's troubleshooting page and attempt
> to figure out why the printer keeps bailing on me. I was wondering if
> anyone else has tried to print on cloth with their 2000p and if they
> have had any success doing so. If so, I would love to hear how you did
> it.
>
>
> Thank you,
> Caron
>
 
Archived from groups: comp.periphs.printers (More info?)

No specific brand. Are you ironing on the right side? Try waxed paper.
"Caron" <cgonthier@gmail.com> wrote in message
news:1103296772.147977.208140@z14g2000cwz.googlegroups.com...
> I've tried the freezer paper, but the paper doesn't seem to adhere to
> the cloth very well. Is there a specific kind of freezer paper that you
> use? I've been using Reynolds plastic coated freezer paper since that
> is all I found when I went to the grocery store.
>
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom