Question probably simple fix ? new build together and getting tpm/kernal errors and fatal crashes. Wiring ok?

[worst_pc_builder]

Just switched to amd and took out all my intel stuff put in a new board. Is this wiring right ? As i forgot to take a picture before I started pulling everything out!
Is this right ?its the only way i could get it to fit ? Do i need an adapter got that cable with multiple wires to fit in the right hand side ?

when i boot i get orange dram then red light cpu. Then it goes white and green and boots

build spec
amd 7800x3d
asus tuf b650plus wireless
corsair 6k ram
samsung ssd 2tb
corsair 1000w psu

Event viewer logs
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Dump file creation failed due to error during dump creation.
The device driver for the Trusted Platform Module (TPM) encountered a non-recoverable error in the TPM hardware, which prevents TPM services (such as data encryption) from being used. For further help, please contact the computer manufacturer.

 

[Grobe]

When replacing mobo and CPU you must re-install Windows to get it to work properly.

 

[kanewolf]

When replacing mobo and CPU you must re-install Windows to get it to work properly.

Yep, first question, is this a clean Windows install or did you try to reuse your previous C: drive ???

 

[worst_pc_builder]

Yep, first question, is this a clean Windows install or did you try to reuse your previous C: drive ???

Ahh sorry, yeah I done a clean windows install as it was a new drive

BIOS Version/Date American Megatrends Inc. 1616, 16/05/2023
i also flashed the bios and updated drivers from the asus tuf board wiresless plus from website.


Just to clarify, I've been playing games on it but now and then i get a fatal error crash. I get a blue screen sometimes when I shutdown but with multiple images and blurred so i cant see the error code on it

 

[Grobe]

You have updated the bios you said. Did that change the stability or behavior somewhat at all ?

Have you testet RAM consistency (Memtest) ?

Random suggestion: Have you tried disabled XMP settings in Bios ?

 

[worst_pc_builder]

You have updated the bios you said. Did that change the stability or behavior somewhat at all ?

Have you testet RAM consistency (Memtest) ?

Random suggestion: Have you tried disabled XMP settings in Bios ?

-tested my ram one stick had 9000+ errors
-acquired new ram gskill 6400, broke seating clip for ram on motherboard xD
- got new motherboard, flashed my bios and ran memtest no errors

cpu fan detection error is happening again should i just ignore this in the bios settings ?

on boot getting the same >orange dram >red cpu >white then green >boot

 

[worst_pc_builder]

still getting crashes currently drawing blk squares with my mouse on desktop haha

 

[Grobe]

-acquired new ram gskill 6400, broke seating clip for ram on motherboard xD
- got new motherboard, flashed my bios and ran memtest no errors

Broke the clip while trying to seat new ram module? Maybe the new ram is now broken as well?