Problem Cooler Master Hyper 612s

[ramboiavzl]

In intel retaining plate when I push nut to the maximum and is not tight

 

[Yudhbir Singh]

You'll have to be a bit more specific, but if you can't push in 1 bolt in the socket then you'll have to unscrew all bolts and screw each back by a little, then go to the next bolt and screw it a little.

 

[ramboiavzl]

The problem is that one of the nut tightening screws up to a maximum as the other but that the screw does not grip and runs over himself