Question Problem with GPU RX 580 8GB

stefkourl

Reputable
Mar 23, 2018
95
1
4,635
0
Hello!I have problem with the gpu and i dont know if it is from that or from something other. Heaven benchmark works for 30 minutes no problem, Furmark too temps are not more than 66 degrees. But when i try to run aida64 extreme gpu test or tried once to mine i got this little black dots on the screen and the driver says that it crashed and the screen goes black then comes back, sometimes i get bsod with videotdr failure and i dont know wheter is the drivers or the gpu faulty somehow? Tried ddu and different drivers and cant fix it.
 

stefkourl

Reputable
Mar 23, 2018
95
1
4,635
0
Which 580 do you have? What are the clock speeds? If temps are that good does a small bump in power fix anything?
The gpu clock is 1380mhz and memory is 2150mhz. I got it like this and havent touched enything yet. Tried to lower the momery, no result clock too i think there is a way but i dont know how, played witcher 3 for about 30 mins no problem but when i try to run the aida benchmark and it begins memory copy then i see black dots all around the screen and it flashed with error from amd and it gives the tdr failure too. Heaven no problem furmark too i dont know what to do anymore. The gpu is MSI RX 580 8GB GAMING X.
 

stefkourl

Reputable
Mar 23, 2018
95
1
4,635
0
So i must give it a little voltage above or i thought about flashing bios because i got it second hand it has been mining but it seems that it comes with the original bios but i think the memory frequency is different. The last thing for me is some hardware error maybe vram or the chip itself i dont know. That is the gpu z info.
 

4745454b

Titan
Moderator
The gpu clock is 1380mhz and memory is 2150mhz.
Sigh. If you told me which 580 you had I could have looked it up and seen if your clocks are what they should be. Not all 580s are clocked the same.

https://www.techpowerup.com/gpu-specs/radeon-rx-580.c2938

Looking at the stock/reference card, try dropping things down to 1257 and 2GHz. Your mined card might just be at the end of it's life and needs a breather.
 

stefkourl

Reputable
Mar 23, 2018
95
1
4,635
0
Sigh. If you told me which 580 you had I could have looked it up and seen if your clocks are what they should be. Not all 580s are clocked the same.

https://www.techpowerup.com/gpu-specs/radeon-rx-580.c2938

Looking at the stock/reference card, try dropping things down to 1257 and 2GHz. Your mined card might just be at the end of it's life and needs a breather.
Cant drop the memory that low lowest is 2050 i think and i mentioned the card is msi rx 580 8gb gaming x edition. I send gpu z pictures too. The card does it only while memory coping on aida, furmark and benchmarks dont have a problem maybe its memory related but i cant drop the memory that low and i think it might be modified somehow. When i try to set less power usage the temp goes back to default max value every time but itself too i though this is strange too.
 
Last edited:

stefkourl

Reputable
Mar 23, 2018
95
1
4,635
0
Do you have any gaming issues? Or just running that one test?

Maybe drop the speed and bump the powerplane up a notch?
No in gaming i dont have issues played witcher 3 about an hour everything seems stable only on that test and i tried to start a mining program then the card does it immediately. So i think its something that comes from that mining. I will try to drop the speed and bump the power again already tried but no result.
 

stefkourl

Reputable
Mar 23, 2018
95
1
4,635
0
Do you have any gaming issues? Or just running that one test?

Maybe drop the speed and bump the powerplane up a notch?
So after a day playing with everything i tried different speeds and drivers and the newest gpu bios and i still get these dots in that program and started to have artifacts in witcher 3, no errors or artifacts and crashes in furmark and heaven benchmark but i think the card is faulty and it is not worth it giving it more time. Tried superposition benchmark and it crashes many times with much artifacts the more i tried to lower or raise something the more artifacts came into the benchmark.
 

ASK THE COMMUNITY