[SOLVED] problem with my fan and motherboard

[ImhavingFuun]

Hello, I've recently bought all the parts for my computer and I was having a problem with my fan and motherboard

This is my motherboard
https://www.amazon.com/gp/product/B0892SHBZ1/ref=ox_sc_act_title_4?smid=ATVPDKIKX0DER&psc=1

This is my fan
https://www.amazon.com/gp/product/B07VGJMQLB/ref=ox_sc_act_title_12?smid=ATVPDKIKX0DER&psc=1

I was just wondering if I could plug the fan right into the motherboard or would I have to do something else

Thank you

 

[ChumP]

You can plug it in directly in any of the 4 pin chassis fan connectors (CHA_FAN/SYS_FAN printed on the board) on the motherboard.
Looks like this:

You'll be able to directly control the fan from the BIOS afterwards.

 

[Mike2009]

Are you asking about the fan to power or the RGB effects?

 

[ImhavingFuun]

Are you asking about the fan to power or the RGB effects?

I am asking about both

 

[ImhavingFuun]

You can plug it in directly in any of the 4 pin chassis fan connectors (CHA_FAN/SYS_FAN printed on the board) on the motherboard.
Looks like this:

You'll be able to directly control the fan from the BIOS afterwards.

I do not believe those ports are on my motherboard, I pretty sure there is a RGB header but I'm not sure there is a fan header

 

[ChumP]

I do not believe those ports are on my motherboard, I pretty sure there is a RGB header but I'm not sure there is a fan header

Of course you have... as a matter of fact you have 4 of them.
Look at this diagram of your board:

You can plug your fans in any of those SYS_FAN(1-4) 4 pin fan headers.

 

[ImhavingFuun]

you are correct, I do. But I have a 3 pin fan header and a 4 pin RGB hub cable. The 3 pin does not fit in the JCORSAIR1 on the top left

 

[ChumP]

you are correct, I do. But I have a 3 pin fan header and a 4 pin RGB hub cable. The 3 pin does not fit in the JCORSAIR1 on the top left

That 3 pin fan connector will fit into any of the 4 pin SYS_FAN header on the motherboard... the connector has guides and it'll fin right in:

 

[kurdtnz]

What case are you using and where is the fan mounted?

 

[ImhavingFuun]

That 3 pin fan connector will fit into any of the 4 pin SYS_FAN header on the motherboard... the connector has guides and it'll fin right in:

Thank you, I very much appreciate you taking you time to help me and trying to figure this out, have a nice day

 

[Mike2009]

the fan header doesn't operate the rgb fan ,,,, the motherboard will need a RGB header ,, 3 pin for 5 volt Addressable and 4 pin for 12 volt non addressable make sure your motherboard has this