problem with my new ram mb: Ga-Ma770t-ud3 rev1.0

[shinystars]

Hi, I've found a problem with the system I have purchased the system RAM, Unfortunately, at the time of purchase I've made a mistake I did not care motherboard specifications for acceptable voltage
1.5v is require But the memory that I have bought voltage is 1.35v

i think For this reason, the system will crash or blue screen or sometime display is black
When I'm using a different memory with voltage 1.5 system have no problem and work stable

How can I solve this problem ?
Is the change in voltage or timing BIOS can solve the problem?
How do I store the correct timing in the BIOS ?
this is my bios screen for change timing
link

my pc spec:
mb:Ga-ma770t UD3 -rev 1.0 bios is update
my cpu : Amd phenom II x4 965
my new ram : Gskill 8gb (4gb*2) 1600 cl9

thank you for your advice

 

[Tradesman1]

Try the DRAM voltage at 1.5 (perfectly safe....if still no joy raise the CPU/NB voltage to 1.2

 

[shinystars]

Try the DRAM voltage at 1.5 (perfectly safe....if still no joy raise the CPU/NB voltage to 1.2

Hi, thanks for your reply
the voltage in the BIOS screen is 1.5 v
see picture please
link
other setting for my ram
link
when i set the cpu/nb to +0.125v
link
system will crash on startup gigabyte logo

 

[shinystars]

Is there a way to solve this problem ?

 

[Tradesman1]

What is the CPU/NB voltage currently at?

 

[shinystars]

What is the CPU/NB voltage currently at?

hi
its normal
link picture

 

[gskill support]

Try one stick at a time to see if it may be a problem with a single module.

Do you have the latest BIOS?

 

[shinystars]

Try one stick at a time to see if it may be a problem with a single module.

Do you have the latest BIOS?

hi
yes bios is update
I've tested individually but the problem still exists : (
I have previously worked with the Ram and were stable
Without changing the BIOS

 

[gskill support]

Run memtest to see if there are any errors. If so, feel free to send them in for RMA exchange:

http://www.gskill.com/en/rma