Hi everyone. I have problems with my new pc build.
First of all, here are my components:
-AMD Ryzen 5 1600x;
-MSI B350 Tomahawk;
-Sapphire Pulse RX 560 4GB;
-Patriot Viper LED 2x4GB 3000Mhz C15;
-Samsung 860 EVO 250GB;
-WD Blue 1TB;
-Be Quiet! Pure Rock;
-Be Quiet! Pure Power 10 CM 600W;
-NZXT H500 White
Monitor: Samsung C27F396FH
Keyboard and mouse: Cooler Master Masterset CM120
So these are all the components. They are all new.
Basically when I turned on the PC for the first time everything worked, the fans worked (system fans, graphic card fan, psu fan), the LEDs of the ram worked, the keyboard and mouse also worked but gave no signal to the monitor. I tried several times to turn on and off but nothing, even attacking the hdmi both on the motherboard and on the graphics card.
after many attempts and after having disconnected and connected some plugs, I finally received a signal on the monitor; then I entered the bios and I checked the frequencies and temperatures, everything seemed regular, the processor went to 3.60Ghz, while the ram went to 2133Mhz if I'm not mistaken. then I started to install windows 10 but while I was installing I get an error that a windows file was missing. Meanwhile I was looking on the phone what could be the problem related to the installation, suddenly the monitor does not give more signal and the leds of the mouse go off but the computer still worked. Then I decide to turn off and on the computer but the monitor gave no signal, the mouse and the keyboard did not turn on, the power LED on the case did not light up and the fan of the graphics card did not work, it only made a micro shot at power up . while the other fans worked, the LEDs of the ram and the dissipator worked. I tried several times to switch off and on and off and unplug all the wiring but nothing. then I decide to remove everything from the case and start everything on the motherboard box and the anti static bag but nothing, the same. I removed the hard drive and the SSD but nothing, I swapped the ram positions in all the slots even putting only one but nothing. I removed the CPU several times to see that some connector was not bent but it is all right. Now the CPU debug led remains on. According to you what problem can it be? I tried all the possible ways and guides, looking for video forums etc. but nothing. Many say that the bios must most probably be updated. But I can't enter inside the BIOS. But I can not understand why it worked first and then instead of suddenly it stopped. At the end I was thinking or asking for the AMD Boot kit or buying the MSI B450 Tomahawk. What do you recommend me to do or if any of you have had similar problems.
Thanks.
First of all, here are my components:
-AMD Ryzen 5 1600x;
-MSI B350 Tomahawk;
-Sapphire Pulse RX 560 4GB;
-Patriot Viper LED 2x4GB 3000Mhz C15;
-Samsung 860 EVO 250GB;
-WD Blue 1TB;
-Be Quiet! Pure Rock;
-Be Quiet! Pure Power 10 CM 600W;
-NZXT H500 White
Monitor: Samsung C27F396FH
Keyboard and mouse: Cooler Master Masterset CM120
So these are all the components. They are all new.
Basically when I turned on the PC for the first time everything worked, the fans worked (system fans, graphic card fan, psu fan), the LEDs of the ram worked, the keyboard and mouse also worked but gave no signal to the monitor. I tried several times to turn on and off but nothing, even attacking the hdmi both on the motherboard and on the graphics card.
after many attempts and after having disconnected and connected some plugs, I finally received a signal on the monitor; then I entered the bios and I checked the frequencies and temperatures, everything seemed regular, the processor went to 3.60Ghz, while the ram went to 2133Mhz if I'm not mistaken. then I started to install windows 10 but while I was installing I get an error that a windows file was missing. Meanwhile I was looking on the phone what could be the problem related to the installation, suddenly the monitor does not give more signal and the leds of the mouse go off but the computer still worked. Then I decide to turn off and on the computer but the monitor gave no signal, the mouse and the keyboard did not turn on, the power LED on the case did not light up and the fan of the graphics card did not work, it only made a micro shot at power up . while the other fans worked, the LEDs of the ram and the dissipator worked. I tried several times to switch off and on and off and unplug all the wiring but nothing. then I decide to remove everything from the case and start everything on the motherboard box and the anti static bag but nothing, the same. I removed the hard drive and the SSD but nothing, I swapped the ram positions in all the slots even putting only one but nothing. I removed the CPU several times to see that some connector was not bent but it is all right. Now the CPU debug led remains on. According to you what problem can it be? I tried all the possible ways and guides, looking for video forums etc. but nothing. Many say that the bios must most probably be updated. But I can't enter inside the BIOS. But I can not understand why it worked first and then instead of suddenly it stopped. At the end I was thinking or asking for the AMD Boot kit or buying the MSI B450 Tomahawk. What do you recommend me to do or if any of you have had similar problems.
Thanks.