Problems with HDD LED Cable

[Neeliyo]

Hey so I'm almost done building my new computer an I ran into a new problem. I can't seem to find the HDD LED cable in my fractal define R4. I have checked my entire case and I don't know if it come with my case or what. Also I don't know where the cables that are connected to the fan controller go. One of them is a molex cable and the other 3 are two pin connectors.

Thanks for any help.

 

[scout_03]

the is no hhd led connector on it for the fan controller the 4 pins molex go to the psu and the 2 pins on fans .

 

[Neeliyo]

the is no hhd led connector on it for the fan controller the 4 pins molex go to the psu and the 2 pins on fans .

No on the motherboard there are two spots for an HDD LED cable but my case came with none. The molex cable doesn't fit in my PSU (XFX Black Edition) and it wasn't long enough.

 

[scout_03]

the case do not have a hdd led on her see fractal , for the molex it should be like the white one on this link http://www.buildcomputers.net/power-supply-connectors.html

 

[Neeliyo]

the case do not have a hdd led on her see fractal , for the molex it should be like the white one on this link http://www.buildcomputers.net/power-supply-connectors.html

There is cable for the HDD called HDD LED. Apparently it indicates whether a drive is transferring data.

 

[scout_03]

usualy the hdd led cable is mark on the front panel connector from the case and if you look at fractal they dont even have a led on the case for this , could you post a picture of this cable and where it is .

 

[Neeliyo]

usualy the hdd led cable is mark on the front panel connector from the case and if you look at fractal they dont even have a led on the case for this , could you post a picture of this cable and where it is .

I don't think you understand what talking about. I am missing the cable. If you look at this picture it shows the HDD LED.

 

[scout_03]

this white kwick connector is from the motherboard the power led goes on it if your motherboard connector dont have a second hdd led connector you could not use it what is your motherboard name and model .

 

[Neeliyo]

this white kwick connector is from the motherboard the power led goes on it if your motherboard connector dont have a second hdd led connector you could not use it what is your motherboard name and model .

Im using an Asus Maximus Hero. I don't have a single led cable.

 

[scout_03]

on page 1-29 they tell that the board have her own hdd led and work wwhen a drive is plug to her ,and on page 1 -44 all the other connector this means the extra one from the case wont be needed to be plug .

 

[Neeliyo]

on page 1-29 they tell that the board have her own hdd led and work wwhen a drive is plug to her ,and on page 1 -44 all the other connector this means the extra one from the case wont be needed to be plug .

Ok thanks that makes me a lot more confident thank you for your help. I just thought it was odd that my case didn't come with the cable but I guess its not too important.

 

[scout_03]

that the way they made this case and your motherboard use the cable she need ,come back again if you need more help we always have something to learn no mater how old we are .