Problems with KyroII 4500 64MB on a MVP3 mobo

[Guest]

Archived from groups: alt.comp.periphs.mainboard.fic (More info?)

Sorry guys, it's on an Epox MVP3C2 and cannot get it to run without
artefacts all over. I ran DXdiag and cannot get anything of the cube to show
in D3D test (had the DX7-part start but freeze when only DX7 was installed).
I've tried disabling D3D & AGP in DXdiag and also reduced video
accleeration, the re-enabled, but no benefit.

I had used the same video card on my VA-503+ for about half a year without
any problems, so wonder why there should be a problem this time - was my
VA-503/KyroII a fluke or have others also had this combo running fine?

I have VIA 4in1 4.35 loaded and also DX 8.1 Hercules drivers are 16.055,
although I have tried those on the CD as well.
TIA

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.fic (More info?)

"John Smith" <someone@microsoft.com> wrote in message
news:UeQhc.10$DL3.2@reader1.news.jippii.net...
> Sorry guys, it's on an Epox MVP3C2 and cannot get it to run without
> artefacts all over. I ran DXdiag and cannot get anything of the cube to
show
> in D3D test (had the DX7-part start but freeze when only DX7 was
installed).
> I've tried disabling D3D & AGP in DXdiag and also reduced video
> accleeration, the re-enabled, but no benefit.
>
> I had used the same video card on my VA-503+ for about half a year without
> any problems, so wonder why there should be a problem this time - was my
> VA-503/KyroII a fluke or have others also had this combo running fine?
>
> I have VIA 4in1 4.35 loaded and also DX 8.1 Hercules drivers are 16.055,
> although I have tried those on the CD as well.
> TIA

Any tips appreciated. Otherwise it's going to get replaced by a TNT2 Vanta
:-(

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.fic (More info?)

make sure its seated in AGP slot well, if still problems you may
want to consider the power supply; if none of the above then
incompatible it seems ~

John Smith wrote:

>"John Smith" <someone@microsoft.com> wrote in message
>news:UeQhc.10$DL3.2@reader1.news.jippii.net...
>
>
>>Sorry guys, it's on an Epox MVP3C2 and cannot get it to run without
>>artefacts all over. I ran DXdiag and cannot get anything of the cube to
>>
>>
>show
>
>
>>in D3D test (had the DX7-part start but freeze when only DX7 was
>>
>>
>installed).
>
>
>>I've tried disabling D3D & AGP in DXdiag and also reduced video
>>accleeration, the re-enabled, but no benefit.
>>
>>I had used the same video card on my VA-503+ for about half a year without
>>any problems, so wonder why there should be a problem this time - was my
>>VA-503/KyroII a fluke or have others also had this combo running fine?
>>
>>I have VIA 4in1 4.35 loaded and also DX 8.1 Hercules drivers are 16.055,
>>although I have tried those on the CD as well.
>>TIA
>>
>>
>
>Any tips appreciated. Otherwise it's going to get replaced by a TNT2 Vanta
>:-(
>
>
>
>