Problems with Sending (2)

Toggle sidebar Toggle sidebar
J

Jerry

Distinguished
Dec 31, 2007
1,812
0
19,780
Archived from groups: microsoft.public.windowsxp.print_fax (More info?)

Ever since I installed SP2 I have been unable to start Winfax 10

So I thought i'd try Xp Fax. When I first configured it I could send,
got a handshacking screech and then"error unable to send fax" or
something to that effect (I didn't write it down)

I was also unable to"pause" the fax within the console

I rebooted and now when I use the Wizard it goes thru' to the eend and
nothing. No send. Nothing in the monitor. Nothing in the Console

What gives?

Using a standard PCI US Robotics WinModem w/voice. i have broadband
(but obvously tried it not connected). Running XpPro SP2

What gives? Any help appreciated.

--
Jerry
 
Archived from groups: microsoft.public.windowsxp.print_fax (More info?)

Hi,
I have the same problem. Windows fax failed to work after installation
of SP2. It still doesn't work after uninstallation. Still struggling..

KC

"Jerry" wrote:

> Ever since I installed SP2 I have been unable to start Winfax 10
>
> So I thought i'd try Xp Fax. When I first configured it I could send,
> got a handshacking screech and then"error unable to send fax" or
> something to that effect (I didn't write it down)
>
> I was also unable to"pause" the fax within the console
>
> I rebooted and now when I use the Wizard it goes thru' to the eend and
> nothing. No send. Nothing in the monitor. Nothing in the Console
>
> What gives?
>
> Using a standard PCI US Robotics WinModem w/voice. i have broadband
> (but obvously tried it not connected). Running XpPro SP2
>
> What gives? Any help appreciated.
>
> --
> Jerry
>
>
 
Archived from groups: microsoft.public.windowsxp.print_fax (More info?)

Jerry & KC: Any luck yet? Any answers from Microsoft on a fix for this? I
had no trouble with faxing prior to the SP 2!
G

"KC" wrote:

> Hi,
> I have the same problem. Windows fax failed to work after installation
> of SP2. It still doesn't work after uninstallation. Still struggling..
>
> KC
>
> "Jerry" wrote:
>
> > Ever since I installed SP2 I have been unable to start Winfax 10
> >
> > So I thought i'd try Xp Fax. When I first configured it I could send,
> > got a handshacking screech and then"error unable to send fax" or
> > something to that effect (I didn't write it down)
> >
> > I was also unable to"pause" the fax within the console
> >
> > I rebooted and now when I use the Wizard it goes thru' to the eend and
> > nothing. No send. Nothing in the monitor. Nothing in the Console
> >
> > What gives?
> >
> > Using a standard PCI US Robotics WinModem w/voice. i have broadband
> > (but obvously tried it not connected). Running XpPro SP2
> >
> > What gives? Any help appreciated.
> >
> > --
> > Jerry
> >
> >
 
Archived from groups: microsoft.public.windowsxp.print_fax (More info?)

Can you please open Control Panel | Phone and Modem Options and see if any
Default Location is selected (alternately, you can do start | run |
telephon.cpl to invoke the same UI). If not default location is selected,
please select one. Let us know if this fixes your problem.

Thanks,
Anand

--
Ananda Sarkar
Microsoft Printing, Imaging and Fax Team

This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email directly to this alias. This alias is for newsgroup
purposes only.

"G" <G@discussions.microsoft.com> wrote in message
news:4D6E42FD-FD59-4F23-BD67-5F7C2593AA2D@microsoft.com...
> Jerry & KC: Any luck yet? Any answers from Microsoft on a fix for this?
I
> had no trouble with faxing prior to the SP 2!
> G
>
> "KC" wrote:
>
> > Hi,
> > I have the same problem. Windows fax failed to work after
installation
> > of SP2. It still doesn't work after uninstallation. Still struggling..
> >
> > KC
> >
> > "Jerry" wrote:
> >
> > > Ever since I installed SP2 I have been unable to start Winfax 10
> > >
> > > So I thought i'd try Xp Fax. When I first configured it I could send,
> > > got a handshacking screech and then"error unable to send fax" or
> > > something to that effect (I didn't write it down)
> > >
> > > I was also unable to"pause" the fax within the console
> > >
> > > I rebooted and now when I use the Wizard it goes thru' to the eend and
> > > nothing. No send. Nothing in the monitor. Nothing in the Console
> > >
> > > What gives?
> > >
> > > Using a standard PCI US Robotics WinModem w/voice. i have broadband
> > > (but obvously tried it not connected). Running XpPro SP2
> > >
> > > What gives? Any help appreciated.
> > >
> > > --
> > > Jerry
> > >
> > >
 
Archived from groups: microsoft.public.windowsxp.print_fax (More info?)

It is working now...I am a bit embarrassed to say, but I think the phone line
into the jack was loose (tab is broken). I have no problems sending and, I
assume (because I have not tried), receiving.
G

"Ananda Sarkar [MSFT]" wrote:

> Can you please open Control Panel | Phone and Modem Options and see if any
> Default Location is selected (alternately, you can do start | run |
> telephon.cpl to invoke the same UI). If not default location is selected,
> please select one. Let us know if this fixes your problem.
>
> Thanks,
> Anand
>
> --
> Ananda Sarkar
> Microsoft Printing, Imaging and Fax Team
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
> Please do not send email directly to this alias. This alias is for newsgroup
> purposes only.
>
> "G" <G@discussions.microsoft.com> wrote in message
> news:4D6E42FD-FD59-4F23-BD67-5F7C2593AA2D@microsoft.com...
> > Jerry & KC: Any luck yet? Any answers from Microsoft on a fix for this?
> I
> > had no trouble with faxing prior to the SP 2!
> > G
> >
> > "KC" wrote:
> >
> > > Hi,
> > > I have the same problem. Windows fax failed to work after
> installation
> > > of SP2. It still doesn't work after uninstallation. Still struggling..
> > >
> > > KC
> > >
> > > "Jerry" wrote:
> > >
> > > > Ever since I installed SP2 I have been unable to start Winfax 10
> > > >
> > > > So I thought i'd try Xp Fax. When I first configured it I could send,
> > > > got a handshacking screech and then"error unable to send fax" or
> > > > something to that effect (I didn't write it down)
> > > >
> > > > I was also unable to"pause" the fax within the console
> > > >
> > > > I rebooted and now when I use the Wizard it goes thru' to the eend and
> > > > nothing. No send. Nothing in the monitor. Nothing in the Console
> > > >
> > > > What gives?
> > > >
> > > > Using a standard PCI US Robotics WinModem w/voice. i have broadband
> > > > (but obvously tried it not connected). Running XpPro SP2
> > > >
> > > > What gives? Any help appreciated.
> > > >
> > > > --
> > > > Jerry
> > > >
> > > >
>
>
>
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom