Processor Doesn't Work

[alex_figueroa22]

So I bent some of the pins on the processor in a way where i cant straighten it completely. They go in, the mobo turns on, my fans turn on, but system does not start up and nothing shows up on my monitor at all. New rig, new build, hdmi cord is connected to mobo (350-f strix mobo with ryzen 5 processor amd4 slot).

I have to buy a new processor right?

 

[Paul NZ]

If you think you fixed the pins, did you install a videocard?? You wont get a signal with a Ryzen, if you're using onboard video ports

 

[13thmonkey]

Yep, and don't turn it on again else you might be buying a new Mobo too.

 

[alex_figueroa22]

Oh shoot... well ive turneed it on about 10 times lol. Im gonna stop. the processor actually gets hot, so theres power going through, but even when i take off the 8-pin connector up there, it still turns on. That is broken most likely and ive removed it. I just hope i didnt mess up my mother oard am4 slot..... i donno if thats common to happen..... i ordered another processor

Mod Edit for Language

 

[Wolfshadw]

Watch your language on these forum. This is a family oriented site and that language is not tolerated.

Thanks
Wolfshadw
Moderator

Edit: Fixed

 

[alex_figueroa22]

Your terms of use doesn't say anything about the choice of language i choose to use in my posts at all... so you just disrupted my post from further recieving feedback from other people while editting what i said....

Also, you mispelled "moderator" on your profile, idk if you noticed that.

 

[13thmonkey]

Your terms of use doesn't say anything about the choice of language i choose to use in my posts at all... so you just disrupted my post from further recieving feedback from other people while editting what i said....

Also, you mispelled "moderator" on your profile, idk if you noticed that.

OK, here's the further feedback you would have received, replace the processor, be prepared to replaced the mobo and RAM. So the disruption is minimal.

And here's some more official feedback, watch the language. See 5.2 here: http://www.purch.com/terms-of-use/

It's linked to on every post that you make inside the main editor, including (without exception) when you create a post.