PS Adapter 4Pin Lead

[DCB_AU]

I have a PIII 300W P/S and I was told that I could use it to supply a PIV M/B, if I obtained a 4pin adapter/converter lead/plug to connect to one of the axillary/spare 12/5V 4 lead plugs. (PIV M/B require the ATX supply plug/lead plus the 4Pin 12/5V supply plug/lead).

Is this correct and is the Aux 4pin plug/lead power the same specs as the standard spare 4pin flat supply plug/lead.

Thanks,

<font color=red>DCB</font color=red><font color=white>_</font color=white><font color=blue>AU</font color=blue>

 

[Crashman]

No, the ATX12v connector has 2 12v and 2 ground pins. The adapter tries to make due with the 1 12v wire from a standard 4-pin molex.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>