PSU 24 pin plug doesn't fit

DrCrippinz

Honorable
Apr 17, 2014
29
0
10,530
It's on a corsair CX PSU, into an MSI motherboard, I know it's a common problem, there is about 2mm left that just won't go in and the clip isn't on. Tried applying lots of force, that didn't work. So we took it back to the store and they replaced it, it still doesn't fit, is it possible that it's the motherboard?
 
Solution
It's a known flaw in the way the CX series 24 pin is made , has a poor clip , once in awhile you see it in the RM series.
http://www.tomshardware.com/s/CX+24+PIN+WON%27T+LATCH/

It's a common question on the forum ^

RMA it or buy a quality branded PSU.
Hi

Is the 24 pin actually a 20 pin + 4 pin plug clipped to gether possibly in the wrong way round

The 20 pin should go in without excessive force and show which way it goes in
Then remove it and try 4 pin plug
Then both of them together as. 24 pin plug


Do this with motherboard out of case if easier

Regards
Mike Barnes
 

Dark Lord of Tech

Retired Moderator
It's a known flaw in the way the CX series 24 pin is made , has a poor clip , once in awhile you see it in the RM series.
http://www.tomshardware.com/s/CX+24+PIN+WON%27T+LATCH/

It's a common question on the forum ^

RMA it or buy a quality branded PSU.
 
Solution